| 05:25:35.708 | Running procedure: 8.6.4b | |
| 05:25:35.711 | This procedure is enabled because the following options: | |
| 05:25:35.711 | - supports.individualRemoteSupervisoryControl == true | |
| 05:25:35.711 | - supports.binaryOutput.status == true | |
| 05:25:35.711 | - supports.binaryOutput.commands == true | |
| 05:25:35.711 | step: 2 | |
| 05:25:35.711 | - Set the DUT's remote supervisory control to 'Enabled' or 'Remote', globally and for every point | |
| 05:25:35.711 | [PLG] | Every binary output is under remote control |
| 05:25:35.711 | step: 3 | |
| 05:25:35.711 | - Binary outputs 0 and 10 must be online, have no exception flags, and be able to go to local mode separately | |
| 05:25:35.711 | step: 4 | |
| 05:25:35.711 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 05:25:35.711 | - g10v0, All Objects | |
| 05:25:35.711 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 05:25:35.711 | g10v0, All Objects | |
| 05:25:35.711 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:25:35.711 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:25:35.712 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:25:35.712 | C0 C0 01 0A 00 06 53 98 | |
| 05:25:35.712 | steps: 5 to 6 | |
| 05:25:35.712 | - Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16 | |
| 05:25:35.712 | - Verify that the response contains objects | |
| 05:25:35.712 | - Verify that the device responds with only variations: Set(g10v1, g10v2) | |
| 05:25:35.712 | - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes | |
| 05:25:35.712 | - Verify that the IIN field does not contain bits IIN(LocalControl) | |
| 05:25:35.712 | - Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation. | |
| 05:25:35.712 | - Note each binary output's flags, to compare the later reads with | |
| 05:25:35.712 | - Verify that binary output(s) 0, 10 are online, with no exception flags | |
| 05:25:35.712 | - Confirm each response that asks for a confirmation | |
| 05:25:35.712 | <-P-- | 05 64 25 44 01 00 00 04 07 3D |
| 05:25:35.712 | C0 C0 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 3A 43 | |
| 05:25:35.712 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3 | |
| 05:25:35.712 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024 |
| 05:25:35.712 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 05:25:35.713 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 05:25:35.713 | g10v2, 2-Byte Start/Stop, start: 0 stop: 19 | |
| 05:25:35.713 | [0] - flags: 0x01 | |
| 05:25:35.713 | [1] - flags: 0x01 | |
| 05:25:35.713 | [2] - flags: 0x01 | |
| 05:25:35.713 | [3] - flags: 0x01 | |
| 05:25:35.713 | [4] - flags: 0x01 | |
| 05:25:35.713 | [5] - flags: 0x01 | |
| 05:25:35.713 | [6] - flags: 0x01 | |
| 05:25:35.713 | [7] - flags: 0x01 | |
| 05:25:35.713 | [8] - flags: 0x01 | |
| 05:25:35.713 | [9] - flags: 0x01 | |
| 05:25:35.713 | [10] - flags: 0x01 | |
| 05:25:35.713 | [11] - flags: 0x01 | |
| 05:25:35.713 | [12] - flags: 0x01 | |
| 05:25:35.713 | [13] - flags: 0x01 | |
| 05:25:35.713 | [14] - flags: 0x01 | |
| 05:25:35.713 | [15] - flags: 0x01 | |
| 05:25:35.713 | [16] - flags: 0x01 | |
| 05:25:35.713 | [17] - flags: 0x01 | |
| 05:25:35.713 | [18] - flags: 0x01 | |
| 05:25:35.713 | [19] - flags: 0x01 | |
| 05:25:35.713 | step: 7 | |
| 05:25:35.713 | - Put the output at index 0 in local control (its remote control switch or setting to 'Disabled' or 'Local') | |
| 05:25:35.713 | [PLG] | Binary output 0 is under local control |
| 05:25:35.714 | step: 8 | |
| 05:25:35.714 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 05:25:35.714 | - g10v0, All Objects | |
| 05:25:35.714 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 05:25:35.714 | g10v0, All Objects | |
| 05:25:35.714 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:25:35.714 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:25:35.714 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:25:35.714 | C0 C1 01 0A 00 06 55 BB | |
| 05:25:35.714 | steps: 9 to 10 | |
| 05:25:35.714 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 05:25:35.714 | - Verify that the response contains objects | |
| 05:25:35.714 | - Verify that the device responds with only variations: Set(g10v1, g10v2) | |
| 05:25:35.714 | - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes | |
| 05:25:35.714 | - Verify that the IIN field contains IIN(LocalControl) | |
| 05:25:35.714 | - Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation. | |
| 05:25:35.714 | - Verify that binary output 0 cleared ONLINE, that every binary output kept the state and other flags it had in the first read, and that binary output 10 is still online | |
| 05:25:35.714 | - Confirm each response that asks for a confirmation | |
| 05:25:35.714 | <-P-- | 05 64 25 44 01 00 00 04 07 3D |
| 05:25:35.714 | C1 C1 81 B0 00 0A 02 01 00 00 13 00 00 01 01 01 97 63 | |
| 05:25:35.714 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3 | |
| 05:25:35.714 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024 |
| 05:25:35.714 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 05:25:35.715 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, LocalControl, NeedTime) |
| 05:25:35.715 | g10v2, 2-Byte Start/Stop, start: 0 stop: 19 | |
| 05:25:35.715 | [0] - flags: 0x00 | |
| 05:25:35.715 | [1] - flags: 0x01 | |
| 05:25:35.715 | [2] - flags: 0x01 | |
| 05:25:35.715 | [3] - flags: 0x01 | |
| 05:25:35.715 | [4] - flags: 0x01 | |
| 05:25:35.715 | [5] - flags: 0x01 | |
| 05:25:35.715 | [6] - flags: 0x01 | |
| 05:25:35.715 | [7] - flags: 0x01 | |
| 05:25:35.715 | [8] - flags: 0x01 | |
| 05:25:35.715 | [9] - flags: 0x01 | |
| 05:25:35.715 | [10] - flags: 0x01 | |
| 05:25:35.715 | [11] - flags: 0x01 | |
| 05:25:35.715 | [12] - flags: 0x01 | |
| 05:25:35.715 | [13] - flags: 0x01 | |
| 05:25:35.715 | [14] - flags: 0x01 | |
| 05:25:35.715 | [15] - flags: 0x01 | |
| 05:25:35.715 | [16] - flags: 0x01 | |
| 05:25:35.715 | [17] - flags: 0x01 | |
| 05:25:35.715 | [18] - flags: 0x01 | |
| 05:25:35.715 | [19] - flags: 0x01 | |
| 05:25:35.715 | step: 11 | |
| 05:25:35.715 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 05:25:35.715 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:35.715 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:35.715 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 05:25:35.715 | g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:35.715 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:35.715 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:25:35.715 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 05:25:35.715 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 05:25:35.715 | C0 C2 05 0C 01 17 01 00 03 01 64 00 00 00 C8 00 ED 4B | |
| 05:25:35.715 | 00 00 00 FF FF | |
| 05:25:35.715 | step: 12 | |
| 05:25:35.715 | - Read a single fragment response w/ sequence(0x02) | |
| 05:25:35.715 | - Verify the response contains the exact object header: | |
| 05:25:35.715 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:35.715 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 7 (LOCAL) | |
| 05:25:35.715 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:25:35.715 | - Verify that the IIN field contains IIN(LocalControl) | |
| 05:25:35.716 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 05:25:35.716 | C2 C2 81 B0 00 0C 01 17 01 00 03 01 64 00 00 00 65 1C | |
| 05:25:35.716 | C8 00 00 00 07 E2 78 | |
| 05:25:35.716 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 05:25:35.716 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 05:25:35.716 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, LocalControl, NeedTime) |
| 05:25:35.716 | g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:35.716 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 7 (LOCAL) | |
| 05:25:35.716 | step: 13 | |
| 05:25:35.716 | - Check that no binary control point operated | |
| 05:25:36.717 | [PLG] | Binary output did NOT operate |
| 05:25:36.717 | step: 14 | |
| 05:25:36.717 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 05:25:36.717 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:36.717 | - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:36.717 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 05:25:36.717 | g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:36.717 | [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:36.717 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:25:36.717 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 05:25:36.717 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 05:25:36.717 | C0 C3 05 0C 01 17 01 0A 03 01 64 00 00 00 C8 00 69 C1 | |
| 05:25:36.717 | 00 00 00 FF FF | |
| 05:25:36.718 | step: 15 | |
| 05:25:36.718 | - Read a single fragment response w/ sequence(0x03) | |
| 05:25:36.718 | - Verify the response contains the exact object header: | |
| 05:25:36.718 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:36.718 | - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:36.718 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:25:36.718 | - Verify that the IIN field contains IIN(LocalControl) | |
| 05:25:36.718 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 05:25:36.718 | C3 C3 81 B0 00 0C 01 17 01 0A 03 01 64 00 00 00 D7 E0 | |
| 05:25:36.718 | C8 00 00 00 00 78 FB | |
| 05:25:36.718 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 05:25:36.718 | <-T-- | fir: 1 fin: 1 seq: 3 |
| 05:25:36.718 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, LocalControl, NeedTime) |
| 05:25:36.718 | g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:36.718 | [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:36.718 | step: 16 | |
| 05:25:36.718 | - Check that binary control point 10 operate | |
| 05:25:36.718 | [PLG] | Binary output 10 did operate |
| 05:25:36.718 | step: 17 | |
| 05:25:36.718 | - Set the DUT's remote supervisory control to 'Enabled' or 'Remote', globally and for every point | |
| 05:25:36.718 | [PLG] | Every binary output is under remote control |
| 05:25:36.718 | step: 18 | |
| 05:25:36.718 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 | |
| 05:25:36.718 | - g10v0, All Objects | |
| 05:25:36.718 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 |
| 05:25:36.719 | g10v0, All Objects | |
| 05:25:36.719 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:25:36.719 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 05:25:36.719 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 05:25:36.719 | C0 C4 01 0A 00 06 4B 14 | |
| 05:25:36.719 | steps: 19 to 20 | |
| 05:25:36.719 | - Read any number of valid responses beginning w/ sequence(0x04) and incrementing by 1 modulo 16 | |
| 05:25:36.719 | - Verify that the response contains objects | |
| 05:25:36.719 | - Verify that the device responds with only variations: Set(g10v1, g10v2) | |
| 05:25:36.719 | - Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes | |
| 05:25:36.719 | - Verify that the IIN field does not contain bits IIN(LocalControl) | |
| 05:25:36.719 | - Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation. | |
| 05:25:36.719 | - Verify that every binary output has the flags it had in the first read, but for the state of 10 | |
| 05:25:36.719 | - Confirm each response that asks for a confirmation | |
| 05:25:36.719 | <-P-- | 05 64 25 44 01 00 00 04 07 3D |
| 05:25:36.719 | C4 C4 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 6A CD | |
| 05:25:36.719 | 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3 | |
| 05:25:36.719 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024 |
| 05:25:36.719 | <-T-- | fir: 1 fin: 1 seq: 4 |
| 05:25:36.719 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime) |
| 05:25:36.719 | g10v2, 2-Byte Start/Stop, start: 0 stop: 19 | |
| 05:25:36.719 | [0] - flags: 0x01 | |
| 05:25:36.719 | [1] - flags: 0x01 | |
| 05:25:36.719 | [2] - flags: 0x01 | |
| 05:25:36.719 | [3] - flags: 0x01 | |
| 05:25:36.719 | [4] - flags: 0x01 | |
| 05:25:36.719 | [5] - flags: 0x01 | |
| 05:25:36.719 | [6] - flags: 0x01 | |
| 05:25:36.719 | [7] - flags: 0x01 | |
| 05:25:36.719 | [8] - flags: 0x01 | |
| 05:25:36.719 | [9] - flags: 0x01 | |
| 05:25:36.719 | [10] - flags: 0x01 | |
| 05:25:36.719 | [11] - flags: 0x01 | |
| 05:25:36.719 | [12] - flags: 0x01 | |
| 05:25:36.719 | [13] - flags: 0x01 | |
| 05:25:36.719 | [14] - flags: 0x01 | |
| 05:25:36.719 | [15] - flags: 0x01 | |
| 05:25:36.719 | [16] - flags: 0x01 | |
| 05:25:36.719 | [17] - flags: 0x01 | |
| 05:25:36.719 | [18] - flags: 0x01 | |
| 05:25:36.719 | [19] - flags: 0x01 | |
| 05:25:36.720 | step: 21 | |
| 05:25:36.720 | - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 | |
| 05:25:36.720 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:36.720 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:36.720 | --A-> | Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 |
| 05:25:36.720 | g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:36.720 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:36.720 | --T-> | fir: 1 fin: 1 seq: 0 |
| 05:25:36.720 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 05:25:36.720 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 05:25:36.720 | C0 C5 05 0C 01 17 01 00 03 01 64 00 00 00 C8 00 DC 0C | |
| 05:25:36.720 | 00 00 00 FF FF | |
| 05:25:36.720 | step: 22 | |
| 05:25:36.720 | - Read a single fragment response w/ sequence(0x05) | |
| 05:25:36.720 | - Verify the response contains the exact object header: | |
| 05:25:36.720 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:36.720 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:36.720 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 05:25:36.720 | - Verify that the IIN field does not contain bits IIN(LocalControl) | |
| 05:25:36.722 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 05:25:36.722 | C5 C5 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 58 37 | |
| 05:25:36.722 | C8 00 00 00 00 78 FB | |
| 05:25:36.722 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 05:25:36.722 | <-T-- | fir: 1 fin: 1 seq: 5 |
| 05:25:36.722 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x05 IIN(DeviceRestart, NeedTime) |
| 05:25:36.722 | g12v1, 1-Byte Count and Index, count: 1 | |
| 05:25:36.722 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 05:25:36.722 | step: 23 | |
| 05:25:36.722 | - Check that binary control point 0 operate | |
| 05:25:36.722 | [PLG] | Binary output 0 did operate |
| 05:25:36.722 | Passed procedure: 8.6.4b |