10:59:37.853		Running procedure: 8.13.2.3
10:59:37.854		This procedure is enabled because the following options:
10:59:37.854		- supports.binaryInput == true
10:59:37.854		- supports.disable.binaryInput == true
10:59:37.854		step: 1
10:59:37.854		- The DUT's binary inputs can be uninstalled or disabled through its configuration
10:59:37.854		step: 2
10:59:37.854		- Uninstall or disable every binary input point on the DUT
10:59:37.854	[PLG]	All binary input points were uninstalled
10:59:37.854	[PLG]	Cycling power
10:59:37.854		step: 3
10:59:37.854		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:59:37.854		- g1v0, All Objects
10:59:37.855	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:59:37.855		g1v0, All Objects
10:59:37.855	--T->	fir: 1 fin: 1 seq: 0
10:59:37.855	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:59:37.855	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:59:37.855		C0 C1 01 01 00 06 5D 5C
10:59:37.855		step: 4
10:59:37.855		- Read a single fragment response w/ sequence(0x01)
10:59:37.855		- Verify that the response is a Null Response, or an Error Response whose only error bits are IIN(ObjectUnknown)
10:59:37.855	<-P--	05 64 0A 44 01 00 00 04 67 88
10:59:37.855		C0 C1 81 90 02 CF 82
10:59:37.855	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
10:59:37.855	<-T--	fir: 1 fin: 1 seq: 0
10:59:37.855	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, ObjectUnknown)
10:59:37.855		Passed procedure: 8.13.2.3
10:59:37.855		restore
10:59:37.855		- Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them
10:59:37.855	[PLG]	All points were reinstalled
10:59:37.855	[PLG]	Cycling power