Click a procedure's id or result to open its log.
| id | result | capture | description |
|---|---|---|---|
| 6 | Link Layer | ||
| 6.1 | Reset link and passive confirm support | ||
| 6.1.2 | PASS | pcap | Test Procedure |
| 6.3 | Request Link Status | ||
| 6.3.2 | PASS | pcap | Test Procedure |
| 6.4 | Test Retries | ||
| 6.4.2 | SKIP | ---- |
Test Procedure Skipped: disabled because supports.dataLinkConfirmRequests != true: Can the DUT be configured to request data link layer confirmation? |
| 6.5 | DIR and FCV Bits | ||
| 6.5.2 | PASS | pcap | Test Procedure |
| 6.6 | Data Link Rejects Invalid Frames | ||
| 6.6.2 | Primary Frames | ||
| 6.6.2.1 | PASS | pcap | Invalid Start Octets |
| 6.6.2.2 | PASS | pcap | Invalid Primary Function Code |
| 6.6.2.3 | PASS | pcap | Invalid Destination Address |
| 6.6.2.4 | PASS | pcap | Invalid CRC |
| 6.6.2.5 | PASS | pcap | Invalid FCV |
| 6.6.3 | Secondary Frames | ||
| 6.6.3.1 | SKIP | ---- |
Invalid Start Octets Skipped: disabled because supports.dataLinkConfirmRequests != true: Can the DUT be configured to request data link layer confirmation? |
| 6.6.3.2 | SKIP | ---- |
Invalid Secondary Function Code Skipped: disabled because supports.dataLinkConfirmRequests != true: Can the DUT be configured to request data link layer confirmation? |
| 6.6.3.3 | SKIP | ---- |
Invalid Destination Address Skipped: disabled because supports.dataLinkConfirmRequests != true: Can the DUT be configured to request data link layer confirmation? |
| 6.6.3.4 | SKIP | ---- |
Invalid CRC Skipped: disabled because supports.dataLinkConfirmRequests != true: Can the DUT be configured to request data link layer confirmation? |
| 6.7 | Self-Address Support | ||
| 6.7.2 | PASS | pcap | Test Procedure |
| 7 | Transport Layer | ||
| 7.2 | PASS | pcap | Segmentation of application layer class 0 poll |
| 8 | Application Layer | ||
| 8.1 | Binary Output Status | ||
| 8.1.2 | PASS | pcap | Test Procedure |
| 8.2 | Binary Output Controls | ||
| 8.2.1 | Select Before Operate | ||
| 8.2.1.2.1 | PASS | pcap | Binary Output, SBO, 0x28 |
| 8.2.1.2.2 | PASS | pcap | Binary Output, SBO, 0x17 |
| 8.2.1.2.3 | PASS | pcap | Binary Output, SBO, To Uninstalled Point |
| 8.2.1.2.4 | PASS | pcap | Binary Output, SBO, Execute Issued After Timeout |
| 8.2.1.2.5 | PASS | pcap | Binary Output, SBO, Execute to Different Point Than Select |
| 8.2.1.2.6 | PASS | pcap | Binary Output, SBO, Execute On Time does not match Select On Time |
| 8.2.1.2.7 | PASS | pcap | Binary Output, SBO, Execute Off Time does not match Select Off Time |
| 8.2.1.2.8 | PASS | pcap | Binary Output, SBO, Select with supported Code, Execute with different Code |
| 8.2.1.2.9 | PASS | pcap | Binary Output, SBO, Select 0x28, Execute 0x17 |
| 8.2.1.2.10 | PASS | pcap | Binary Output, SBO, Configurable Device |
| 8.2.1.2.11 | PASS | pcap | Binary Output, SBO, Same Sequence Number Select Retries |
| 8.2.1.2.12 | PASS | pcap | Binary Output, SBO, Incrementing Sequence Number Select Retries |
| 8.2.1.2.13 | PASS | pcap | Binary Output, SBO, Same Sequence Number Operate Retries |
| 8.2.1.2.14 | PASS | pcap | Binary Output, SBO, Incrementing Sequence Number Operate Retries |
| 8.2.1.2.15 | PASS | pcap | Binary Output, SBO, Sequence number checking |
| 8.2.2 | Direct Operate with Acknowledge | ||
| 8.2.2.2.1 | PASS | pcap | Binary Output, Direct Operate |
| 8.2.2.2.2 | PASS | pcap | Binary Output, Direct Operate to Uninstalled Point |
| 8.2.2.2.3 | PASS | pcap | Binary Output, Direct Operate, Configurable Device |
| 8.2.3 | Direct Operate, No Acknowledge | ||
| 8.2.3.2.1 | PASS | pcap | Binary Output, Direct Operate, No Acknowledge |
| 8.2.3.2.2 | PASS | pcap | Binary Output, Direct Operate, No Acknowledge, to an Uninstalled Point |
| 8.2.3.2.3 | PASS | pcap | Binary Output, Direct Operate, No Acknowledge, Configurable Device |
| 8.2.4 | Multiple Object Requests | ||
| 8.2.4.2 | PASS | pcap | Test Procedure |
| 8.2.5 | Control Code Support | ||
| 8.2.5.2.1 | PASS | pcap | Binary Output, Complementary Function Support |
| 8.2.5.2.2 | PASS | pcap | Binary Output, Single Function Support |
| 8.3 | Analog Output Status | ||
| 8.3.2 | PASS | pcap | Test Procedure |
| 8.4 | Analog Output Controls | ||
| 8.4.1 | Analog Output Controls, Select Before Operate | ||
| 8.4.1.2.1 | PASS | pcap | Analog Output, SBO, 0x28 |
| 8.4.1.2.2 | PASS | pcap | Analog Output, SBO, 0x17 |
| 8.4.1.2.3 | PASS | pcap | Analog Output, SBO, to Uninstalled Point |
| 8.4.1.2.4 | PASS | pcap | Analog Output, SBO, Execute Issued After Time-out |
| 8.4.1.2.5 | PASS | pcap | Analog Output, SBO, Execute Value does not match Select Value |
| 8.4.1.2.6 | PASS | pcap | Analog Output, SBO, Select 0x28, Execute 0x17 |
| 8.4.1.2.7 | PASS | pcap | Analog Output, SBO, Configurable Device |
| 8.4.1.2.8 | PASS | pcap | Analog Output, SBO, Same Sequence Number Select Retries |
| 8.4.1.2.9 | PASS | pcap | Analog Output, SBO, Incrementing Sequence Number Select Retries |
| 8.4.1.2.10 | PASS | pcap | Analog Output, SBO, Same Sequence Number Operate Retries |
| 8.4.1.2.11 | PASS | pcap | Analog Output, SBO, Incrementing Sequence Number Operate Retries |
| 8.4.1.2.12 | PASS | pcap | Analog Output, SBO, Sequence number checking |
| 8.4.2 | Analog Output Controls, Direct Operate | ||
| 8.4.2.2.1 | PASS | pcap | Analog Output, Direct Operate |
| 8.4.2.2.2 | PASS | pcap | Analog Output, Direct Operate, to Uninstalled Point |
| 8.4.2.2.3 | PASS | pcap | Analog Output, Direct Operate, Configurable Device |
| 8.4.3 | Analog Output Controls, Direct Operate No Acknowledgment | ||
| 8.4.3.2.1 | PASS | pcap | Analog Output, Direct Operate, No Acknowledge |
| 8.4.3.2.2 | PASS | pcap | Analog Output, Direct Operate, No Acknowledge, to an Uninstalled Point |
| 8.4.3.2.3 | PASS | pcap | Analog Output, Direct Operate, No Acknowledge, Configurable Device |
| 8.4.4 | Analog Output Controls, Multiple Objects | ||
| 8.4.4.2 | PASS | pcap | Test Procedure |
| 8.5 | Class Data | ||
| 8.5.1 | Class 0 | ||
| 8.5.1.2 | PASS | pcap | Test Procedure |
| 8.5.2 | Class 1 | ||
| 8.5.2.2.1 | PASS | pcap | Class 1 Data, 0x06 |
| 8.5.2.2.2 | PASS | pcap | Class 1 Data, 0x07 |
| 8.5.2.2.3 | PASS | pcap | Class 1 Data, 0x08 |
| 8.5.2.2.4 | PASS | pcap | Class 1 Data Without Confirm |
| 8.5.3 | Class 2 | ||
| 8.5.3.2.1 | PASS | pcap | Class 2 Data, 0x06 |
| 8.5.3.2.2 | PASS | pcap | Class 2 Data, 0x07 |
| 8.5.3.2.3 | PASS | pcap | Class 2 Data, 0x08 |
| 8.5.3.2.4 | PASS | pcap | Class 2 Data Without Confirm |
| 8.5.4 | Class 3 | ||
| 8.5.4.2.1 | PASS | pcap | Class 3 Data, 0x06 |
| 8.5.4.2.2 | PASS | pcap | Class 3 Data, 0x07 |
| 8.5.4.2.3 | PASS | pcap | Class 3 Data, 0x08 |
| 8.5.4.2.4 | PASS | pcap | Class 3 Data Without Confirm |
| 8.5.5 | Multiple Object Request | ||
| 8.5.5.2.1 | PASS | pcap | Multiple Object Request, Class 1, 2, and 3 |
| 8.5.5.2.2 | PASS | pcap | Multiple Object Request, Class 1, 2, 3, and 0 |
| 8.5.6 | Class Assignment Verification | ||
| 8.5.6.2 | PASS | pcap | Test Procedure |
| 8.6 | Indications | ||
| 8.6.1 | Restart | ||
| 8.6.1.2 | PASS | pcap | Test Procedure |
| 8.6.2 | Bad Function | ||
| 8.6.2.2 | PASS | pcap | Test Procedure |
| 8.6.3 | Object Unknown | ||
| 8.6.3.2 | PASS | pcap | Test Procedure |
| 8.6.4 | Local | ||
| 8.6.4.2 | PASS | pcap | Test Procedure for Devices with Global Remote Supervisory Control |
| 8.6.4.3 | PASS | pcap | Test Procedure for Devices with Individual Remote Supervisory Control |
| 8.6.5 | Broadcast Address and All Stations Indication | ||
| 8.6.5.2 | PASS | pcap | Test Procedure |
| 8.6.5.3 | PASS | pcap | Test Procedure |
| 8.6.5.4 | PASS | pcap | Test Procedure, Confirmed Response Options |
| 8.6.6 | Buffer Overflow | ||
| 8.6.6.2.1 | PASS | pcap | Buffer Overflow, Binary Input Change Event Buffers |
| 8.6.6.2.2 | PASS | pcap | Buffer Overflow, Analog Input Change Event Buffers |
| 8.6.6.2.3 | PASS | pcap | Buffer Overflow, Binary Counter Change Event Buffers |
| 8.6.6.2.4 | PASS | pcap | Double-bit Input Change Event Buffers |
| 8.7 | Time | ||
| 8.7.1 | Delay Measurement | ||
| 8.7.1.2 | PASS | pcap | Test Procedure |
| 8.7.2 | Synchronization | ||
| 8.7.2.2 | PASS | pcap | Test Procedure |
| 8.8 | Cold Restart | ||
| 8.8.2 | PASS | pcap | Test Procedure |
| 8.9 | Application Layer Fragmentation | ||
| 8.9.1 | Use of FIR, FIN and SEQUENCE in Fragmentation | ||
| 8.9.1.2 | PASS | pcap | Test Procedure |
| 8.9.2 | Use of Confirmation in Fragmentation | ||
| 8.9.2.2 | PASS | pcap | Test Procedure |
| 8.10 | Multi-Drop Support | ||
| 8.10.2 | Not implemented | ---- |
Test Procedure Skipped: not implemented |
| 8.11 | Unsolicited Responses | ||
| 8.11.2 | Test Procedure | ||
| 8.11.2.1 | PASS | pcap | Unsolicited Response Configuration/Startup |
| 8.11.2.2 | PASS | pcap | Unsolicited Response - Class 1 Data |
| 8.11.2.3 | PASS | pcap | Unsolicited Response - Class 2 Data |
| 8.11.2.4 | PASS | pcap | Unsolicited Response - Class 3 Data |
| 8.11.2.5 | PASS | pcap | Unsolicited and Polled Responses |
| 8.11.2.6 | PASS | pcap | Unsolicited Responses Off |
| 8.12 | Collision Avoidance | ||
| 8.12.2 | Not implemented | ---- |
Test Procedure Skipped: not implemented |
| 8.13 | Binary Inputs | ||
| 8.13.2.1 | SKIP | ---- |
Device does not have Binary Inputs Skipped: disabled because supports.binaryInput != false: Does the DUT support Binary Input points? |
| 8.13.2.2 | PASS | pcap | Device has Binary Inputs |
| 8.13.2.3 | PASS | pcap | Device supports Binary Inputs, Configurable Device |
| 8.14 | Binary Input Change | ||
| 8.14.2.1 | SKIP | ---- |
Device does not support Binary Input Changes Skipped: disabled because it needs not (supports.binaryInput == true and supports.binaryInputChangeEvents == true) |
| 8.14.2.2 | PASS | pcap | Binary Input Change, 0x06 |
| 8.14.2.3 | PASS | pcap | Binary Input Change, 0x07 |
| 8.14.2.4 | PASS | pcap | Binary Input Change, 0x08 |
| 8.14.2.5 | PASS | pcap | Binary Input Change Without Confirm |
| 8.14.2.6 | PASS | pcap | Binary Input Change Without Time, 0x06 |
| 8.14.2.7 | PASS | pcap | Binary Input Change Without Time, 0x07 |
| 8.14.2.8 | PASS | pcap | Binary Input Change Without Time, 0x08 |
| 8.14.2.9 | PASS | pcap |
Binary Input Change With Time, 0x06 Note: The events were checked as TB2017-003a 5.1.3.1.2 requires, which the DUT implements, in place of the steps' g2v2 only |
| 8.14.2.10 | PASS | pcap |
Binary Input Change With Time, 0x07 Note: The events were checked as TB2017-003a 5.1.3.1.2 requires, which the DUT implements, in place of the steps' g2v2 only |
| 8.14.2.11 | PASS | pcap |
Binary Input Change With Time, 0x08 Note: The events were checked as TB2017-003a 5.1.3.1.2 requires, which the DUT implements, in place of the steps' g2v2 only |
| 8.14.2.12 | PASS | pcap | Binary Input Change With Relative Time, 0x06 |
| 8.14.2.13 | PASS | pcap | Binary Input Change With Relative Time, 0x07 |
| 8.14.2.14 | PASS | pcap | Binary Input Change With Relative Time, 0x08 |
| 8.14.2.15 | PASS | pcap | Binary Input Change with Relative Time, Long Interval |
| 8.15 | Common Time of Occurrence | ||
| 8.15.2 | PASS | pcap | Test Procedure |
| 8.16 | Binary Counters | ||
| 8.16.1 | Binary Counters, Running | ||
| 8.16.1.2.1 | SKIP | ---- |
Device does not have Binary Counters Skipped: disabled because supports.counter != false: Does the DUT support Counter points? |
| 8.16.1.2.2 | PASS | pcap | Device responds with Binary Counters |
| 8.16.1.2.3 | PASS | pcap | Device supports Binary Counters, Configurable Device |
| 8.16.2 | Binary Counters, Frozen | ||
| 8.16.2.2.1 | SKIP | ---- |
Device does not have Frozen Counters Skipped: disabled because supports.frozenCounter != false: Does the DUT support Frozen Counter points? |
| 8.16.2.2.2 | PASS | pcap | Binary Counter, Freeze |
| 8.16.2.2.3 | PASS | pcap | Binary Counter, Freeze And Clear |
| 8.16.2.2.4 | PASS | pcap | Binary Counter, Freeze, No Acknowledge |
| 8.16.2.2.5 | PASS | pcap | Binary Counter, Freeze And Clear, No Acknowledge |
| 8.17 | Binary Counters, Event | ||
| 8.17.2 | Test Procedure | ||
| 8.17.2.1 | SKIP | ---- |
Device does not support Binary Counter Events Skipped: disabled because it needs not (supports.counter == true and supports.counterChangeEvents == true) |
| 8.17.2.2 | PASS | pcap | Binary Counters, Event, 0x06 |
| 8.17.2.3 | PASS | pcap | Binary Counters, Event, 0x07 |
| 8.17.2.4 | PASS | pcap | Binary Counters, Event, 0x08 |
| 8.17.2.5 | PASS | pcap | Binary Counters, Event Without Confirm |
| 8.18 | Analog Input | ||
| 8.18.2 | Test Procedure | ||
| 8.18.2.1 | SKIP | ---- |
Device does not have Analog Inputs Skipped: disabled because supports.analogInput != false: Does the DUT support Analog Input points? |
| 8.18.2.2 | PASS | pcap | Device has Analog Inputs |
| 8.19 | Analog Change Event | ||
| 8.19.2 | Test Procedure | ||
| 8.19.2.1 | PASS | pcap | Analog Input Change |
| 8.19.2.2 | PASS | pcap | Analog Input Change, Without Confirm |
| 8.20 | Multiple Read Requests | ||
| 8.20.2 | PASS | pcap | Test Procedure |
| 8.21 | Double-bit Inputs | ||
| 8.21.2 | Test Procedure | ||
| 8.21.2.1 | PASS | pcap | Device has Double-bit Inputs |
| 8.21.2.2 | PASS | pcap | Device supports Double-bit Inputs, Configurable Device |
| 8.22 | Double-bit Input Change | ||
| 8.22.2 | Test Procedure | ||
| 8.22.2.1 | SKIP | ---- |
Device does not support Double-bit Input Changes Skipped: disabled because it needs not (supports.doubleBitInput == true and supports.doubleBitInputChangeEvents == true) |
| 8.22.2.2 | PASS | pcap | Double-bit Input Change, 0x06 |
| 8.22.2.3 | PASS | pcap | Double-bit Input Change, 0x07 |
| 8.22.2.4 | PASS | pcap | Double-bit Input Change, 0x08 |
| 8.22.2.5 | PASS | pcap | Double-bit Input Change Without Confirm |
| 8.22.2.6 | PASS | pcap | Double-bit Input Change Without Time, 0x06 |
| 8.22.2.7 | PASS | pcap | Double-bit Input Change Without Time, 0x07 |
| 8.22.2.8 | PASS | pcap | Double-bit Input Change Without Time, 0x08 |
| 8.22.2.9 | PASS | pcap |
Double-bit Input Change With Time, 0x06 Note: The events were checked as TB2017-003a 5.1.3.1.2 requires, which the DUT implements, in place of the steps' g4v2 only |
| 8.22.2.10 | PASS | pcap |
Double-bit Input Change With Time, 0x07 Note: The events were checked as TB2017-003a 5.1.3.1.2 requires, which the DUT implements, in place of the steps' g4v2 only |
| 8.22.2.11 | PASS | pcap |
Double-bit Input Change With Time, 0x08 Note: The events were checked as TB2017-003a 5.1.3.1.2 requires, which the DUT implements, in place of the steps' g4v2 only |
| 8.22.2.12 | PASS | pcap | Double-bit Input Change With Relative Time, 0x06 |
| 8.22.2.13 | PASS | pcap | Double-bit Input Change With Relative Time, 0x07 |
| 8.22.2.14 | PASS | pcap | Double-bit Input Change With Relative Time, 0x08 |
| 8.22.2.15 | PASS | pcap | Double-bit Input Change with Relative Time, Long Interval |
| 8.23 | Device Attributes | ||
| 8.23.2 | Test Procedure | ||
| 8.23.2.1 | PASS | pcap | Variation 255 – list of attribute variations |
| 8.23.2.2 | PASS | pcap | Variation 254 – non-specific all attributes request |
| 8.23.2.3 | PASS | pcap | Variation nnn – specific attributes read request |
| 8.23.2.4 | PASS | pcap | Variation nnn – specific attributes write request |