10:59:45.066		Running procedure: 8.14.2.6
10:59:45.067		This procedure is enabled because the following options:
10:59:45.067		- supports.binaryInput == true
10:59:45.067		- supports.binaryInputChangeEvents == true
10:59:45.067		step: 1
10:59:45.067		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:59:45.067		- g2v0, All Objects
10:59:45.067	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:59:45.067		g2v0, All Objects
10:59:45.067	--T->	fir: 1 fin: 1 seq: 0
10:59:45.067	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:59:45.068	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:59:45.068		C0 C1 01 02 00 06 95 76
10:59:45.068		steps: 2 to 3
10:59:45.068		- Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16
10:59:45.068		- If the response carries data, verify that it asks for an application layer confirmation.
10:59:45.068		- Confirm each response that asks for a confirmation
10:59:45.068	<-P--	05 64 0A 44 01 00 00 04 67 88
10:59:45.068		C0 C1 81 90 00 73 EE
10:59:45.068	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
10:59:45.068	<-T--	fir: 1 fin: 1 seq: 0
10:59:45.068	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
10:59:45.068		step: 4
10:59:45.068		- Change binary inputs several times, one or more of them, to create events
10:59:45.068	[PLG]	Updated BI 0: value=true, flags=81, timestamp=1793185185068 (UNSYNCHRONIZED_TIME)
10:59:45.068	[PLG]	Updated BI 1: value=true, flags=81, timestamp=1793185185068 (UNSYNCHRONIZED_TIME)
10:59:45.069	[PLG]	Updated BI 2: value=true, flags=81, timestamp=1793185185068 (UNSYNCHRONIZED_TIME)
10:59:45.069	[PLG]	Updated BI 3: value=true, flags=81, timestamp=1793185185069 (UNSYNCHRONIZED_TIME)
10:59:45.069	[PLG]	Updated BI 4: value=true, flags=81, timestamp=1793185185069 (UNSYNCHRONIZED_TIME)
10:59:45.069	[PLG]	Updated BI 5: value=true, flags=81, timestamp=1793185185069 (UNSYNCHRONIZED_TIME)
10:59:45.069	[PLG]	Updated BI 6: value=true, flags=81, timestamp=1793185185069 (UNSYNCHRONIZED_TIME)
10:59:45.069	[PLG]	Updated BI 7: value=true, flags=81, timestamp=1793185185069 (UNSYNCHRONIZED_TIME)
10:59:45.069	[PLG]	Updated BI 8: value=true, flags=81, timestamp=1793185185069 (UNSYNCHRONIZED_TIME)
10:59:45.069	[PLG]	Updated BI 9: value=true, flags=81, timestamp=1793185185069 (UNSYNCHRONIZED_TIME)
10:59:45.069		The plugin reports the DUT's clock unsynchronized
10:59:45.069		step: 5
10:59:45.069		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:59:45.069		- g2v1, All Objects
10:59:45.069	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:59:45.069		g2v1, All Objects
10:59:45.069	--T->	fir: 1 fin: 1 seq: 0
10:59:45.069	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:59:45.069	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:59:45.069		C0 C2 01 02 01 06 D1 B8
10:59:45.069		steps: 6 to 9
10:59:45.069		- Read a single fragment response w/ sequence(0x02)
10:59:45.069		- Verify that the response holds every Binary Input event generated
10:59:45.069		- If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
10:59:45.069		- Verify that an application layer confirmation is requested.
10:59:45.069		- Verify that the device responds with events, of only Set(g2v1)
10:59:45.069		- Verify that the objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
10:59:45.069		- Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
10:59:45.069		- Confirm each response that asks for a confirmation
10:59:45.069	<-P--	05 64 2D 44 01 00 00 04 DB A7
10:59:45.069		C1 E2 81 90 00 02 01 28 0A 00 00 00 81 01 00 81 C6 84
10:59:45.069		02 00 81 03 00 81 04 00 81 05 00 81 06 00 81 07 7C AC
10:59:45.069		00 81 08 00 81 09 00 81 A0 4C
10:59:45.069	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 45 dest: 1 src: 1024
10:59:45.069	<-T--	fir: 1 fin: 1 seq: 1
10:59:45.070	<-A--	Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
10:59:45.070		g2v1, 2-Byte Count and Index, count: 10
10:59:45.070		[0] - flags: 0x81
10:59:45.070		[1] - flags: 0x81
10:59:45.070		[2] - flags: 0x81
10:59:45.070		[3] - flags: 0x81
10:59:45.070		[4] - flags: 0x81
10:59:45.070		[5] - flags: 0x81
10:59:45.070		[6] - flags: 0x81
10:59:45.070		[7] - flags: 0x81
10:59:45.070		[8] - flags: 0x81
10:59:45.070		[9] - flags: 0x81
10:59:45.070	--A->	Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:59:45.070	--T->	fir: 1 fin: 1 seq: 0
10:59:45.070	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
10:59:45.070	--P->	05 64 08 C4 00 04 01 00 9A 19
10:59:45.070		C0 C2 00 D6 8D
10:59:45.070	[PLG]	Verified 10 binary input point event(s)
10:59:45.070		step: 10
10:59:45.070		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:59:45.070		- g2v0, All Objects
10:59:45.070	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:59:45.070		g2v0, All Objects
10:59:45.070	--T->	fir: 1 fin: 1 seq: 0
10:59:45.070	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:59:45.070	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:59:45.070		C0 C3 01 02 00 06 99 30
10:59:45.070		step: 11
10:59:45.070		- Read a single fragment response w/ sequence(0x03)
10:59:45.070		- Verify that the response is empty
10:59:45.070		- Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:59:45.071	<-P--	05 64 0A 44 01 00 00 04 67 88
10:59:45.071		C2 C3 81 90 00 D6 60
10:59:45.071	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
10:59:45.071	<-T--	fir: 1 fin: 1 seq: 2
10:59:45.071	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
10:59:45.071		Passed procedure: 8.14.2.6