11:01:08.497		Running procedure: 8.16.1.2.3
11:01:08.498		This procedure is enabled because the following options:
11:01:08.498		- supports.counter == true
11:01:08.498		- supports.disable.counter == true
11:01:08.498		step: 1
11:01:08.498		- The DUT's counters can be uninstalled or disabled through its configuration
11:01:08.498		step: 2
11:01:08.498		- Uninstall or disable every counter point on the DUT
11:01:08.498	[PLG]	All counter points were uninstalled
11:01:08.498	[PLG]	Cycling power
11:01:08.498		step: 3
11:01:08.498		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:08.498		- g20v0, All Objects
11:01:08.499	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:08.499		g20v0, All Objects
11:01:08.499	--T->	fir: 1 fin: 1 seq: 0
11:01:08.499	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:08.499	--P->	05 64 0B C4 00 04 01 00 CA 8A
11:01:08.499		C0 C1 01 14 00 06 FC F5
11:01:08.499		step: 4
11:01:08.499		- Read a single fragment response w/ sequence(0x01)
11:01:08.499		- Verify that the response is a Null Response, or an Error Response whose only error bits are IIN(ObjectUnknown)
11:01:08.499	<-P--	05 64 0A 44 01 00 00 04 67 88
11:01:08.499		C0 C1 81 90 02 CF 82
11:01:08.500	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:01:08.500	<-T--	fir: 1 fin: 1 seq: 0
11:01:08.500	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime, ObjectUnknown)
11:01:08.500		Passed procedure: 8.16.1.2.3
11:01:08.500		restore
11:01:08.500		- Reinstall or re-enable the points that were uninstalled or disabled, so later procedures can use them
11:01:08.500	[PLG]	All points were reinstalled
11:01:08.500	[PLG]	Cycling power