8.19.2.2 Analog Input Change, Without Confirm (revision 2.7, subset level 2)

Device under test: Step Function I/O dnp3 outstation

All results
11:01:27.201 Running procedure: 8.19.2.2
11:01:27.202 This procedure is enabled because the following options:
11:01:27.202 - supports.analogInput == true
11:01:27.202 - supports.analogInputChangeEvents == true
11:01:27.202 step: 1
11:01:27.202 - Raise an analog input by more than its configured deadband and hold it steady, so that an event is generated
11:01:27.202 [PLG] Updated AI 0: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 [PLG] Updated AI 1: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 [PLG] Updated AI 2: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 [PLG] Updated AI 3: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 [PLG] Updated AI 4: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 [PLG] Updated AI 5: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 [PLG] Updated AI 6: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 [PLG] Updated AI 7: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 [PLG] Updated AI 8: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 [PLG] Updated AI 9: value=100.0, flags=1, timestamp=1793185287202 (UNSYNCHRONIZED_TIME)
11:01:27.202 step: 2
11:01:27.202 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:01:27.202 - g32v0, All Objects
11:01:27.203 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
11:01:27.203 g32v0, All Objects
11:01:27.203 --T-> fir: 1 fin: 1 seq: 0
11:01:27.204 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:27.204 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:27.204 C0 C0 01 20 00 06 68 86
11:01:27.204 steps: 3 to 6
11:01:27.204 - Read a single fragment response w/ sequence(0x00)
11:01:27.204 - Verify that the device responds with events, of only Set(g32v1, g32v2)
11:01:27.204 - Verify that the objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
11:01:27.204 - Verify that the reported value is the one the analog input was set to
11:01:27.204 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:01:27.204 - Verify that an application layer confirmation is requested.
11:01:27.204 <-P-- 05 64 55 44 01 00 00 04 39 1A
11:01:27.204 C0 E0 81 90 00 20 01 28 0A 00 00 00 01 64 00 00 D6 FC
11:01:27.204 00 01 00 01 64 00 00 00 02 00 01 64 00 00 00 03 39 99
11:01:27.204 00 01 64 00 00 00 04 00 01 64 00 00 00 05 00 01 91 5E
11:01:27.204 64 00 00 00 06 00 01 64 00 00 00 07 00 01 64 00 78 60
11:01:27.204 00 00 08 00 01 64 00 00 00 09 00 01 64 00 00 00 7B EA
11:01:27.204 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 85 dest: 1 src: 1024
11:01:27.204 <-T-- fir: 1 fin: 1 seq: 0
11:01:27.204 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
11:01:27.204 g32v1, 2-Byte Count and Index, count: 10
11:01:27.204 [0] - flags: 0x01 value: 100
11:01:27.204 [1] - flags: 0x01 value: 100
11:01:27.204 [2] - flags: 0x01 value: 100
11:01:27.204 [3] - flags: 0x01 value: 100
11:01:27.204 [4] - flags: 0x01 value: 100
11:01:27.204 [5] - flags: 0x01 value: 100
11:01:27.204 [6] - flags: 0x01 value: 100
11:01:27.204 [7] - flags: 0x01 value: 100
11:01:27.204 [8] - flags: 0x01 value: 100
11:01:27.204 [9] - flags: 0x01 value: 100
11:01:27.205 [PLG] Verified 10 analog input point event(s)
11:01:27.205 steps: 7 to 8
11:01:27.205 - Expect no response within 6000 ms.
11:01:33.207 step: 9
11:01:33.207 - Raise an analog input by more than its configured deadband and hold it steady, so that an event is generated
11:01:33.207 [PLG] Updated AI 0: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.207 [PLG] Updated AI 1: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.207 [PLG] Updated AI 2: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.207 [PLG] Updated AI 3: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.207 [PLG] Updated AI 4: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.207 [PLG] Updated AI 5: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.207 [PLG] Updated AI 6: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.207 [PLG] Updated AI 7: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.207 [PLG] Updated AI 8: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.207 [PLG] Updated AI 9: value=200.0, flags=1, timestamp=1793185293207 (UNSYNCHRONIZED_TIME)
11:01:33.208 step: 10
11:01:33.208 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:33.208 - g32v0, All Objects
11:01:33.208 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:33.208 g32v0, All Objects
11:01:33.208 --T-> fir: 1 fin: 1 seq: 0
11:01:33.208 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:33.208 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:33.208 C0 C1 01 20 00 06 6E A5
11:01:33.208 steps: 11 to 14
11:01:33.208 - Read a single fragment response w/ sequence(0x01)
11:01:33.208 - Verify that the device responds with events, of only Set(g32v1, g32v2)
11:01:33.208 - Verify that the objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
11:01:33.208 - Verify that the reported value is the one the analog input was set to
11:01:33.208 - The DUT may also report the state applied in the first step before reporting the present state.
11:01:33.208 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:01:33.208 - Verify that an application layer confirmation is requested.
11:01:33.208 - Confirm each response that asks for a confirmation
11:01:33.208 <-P-- 05 64 9B 44 01 00 00 04 C2 54
11:01:33.208 C1 E1 81 90 00 20 01 28 14 00 00 00 01 64 00 00 E7 37
11:01:33.208 00 01 00 01 64 00 00 00 02 00 01 64 00 00 00 03 39 99
11:01:33.208 00 01 64 00 00 00 04 00 01 64 00 00 00 05 00 01 91 5E
11:01:33.208 64 00 00 00 06 00 01 64 00 00 00 07 00 01 64 00 78 60
11:01:33.208 00 00 08 00 01 64 00 00 00 09 00 01 64 00 00 00 7B EA
11:01:33.208 00 00 01 C8 00 00 00 01 00 01 C8 00 00 00 02 00 55 03
11:01:33.208 01 C8 00 00 00 03 00 01 C8 00 00 00 04 00 01 C8 E4 B3
11:01:33.208 00 00 00 05 00 01 C8 00 00 00 06 00 01 C8 00 00 AB 6E
11:01:33.208 00 07 00 01 C8 00 00 00 08 00 01 C8 00 00 00 09 A4 4F
11:01:33.208 00 01 C8 00 00 00 64 23
11:01:33.208 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 155 dest: 1 src: 1024
11:01:33.208 <-T-- fir: 1 fin: 1 seq: 1
11:01:33.209 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
11:01:33.209 g32v1, 2-Byte Count and Index, count: 20
11:01:33.209 [0] - flags: 0x01 value: 100
11:01:33.209 [1] - flags: 0x01 value: 100
11:01:33.209 [2] - flags: 0x01 value: 100
11:01:33.209 [3] - flags: 0x01 value: 100
11:01:33.209 [4] - flags: 0x01 value: 100
11:01:33.209 [5] - flags: 0x01 value: 100
11:01:33.209 [6] - flags: 0x01 value: 100
11:01:33.209 [7] - flags: 0x01 value: 100
11:01:33.209 [8] - flags: 0x01 value: 100
11:01:33.209 [9] - flags: 0x01 value: 100
11:01:33.209 [0] - flags: 0x01 value: 200
11:01:33.209 [1] - flags: 0x01 value: 200
11:01:33.209 [2] - flags: 0x01 value: 200
11:01:33.209 [3] - flags: 0x01 value: 200
11:01:33.209 [4] - flags: 0x01 value: 200
11:01:33.209 [5] - flags: 0x01 value: 200
11:01:33.209 [6] - flags: 0x01 value: 200
11:01:33.209 [7] - flags: 0x01 value: 200
11:01:33.209 [8] - flags: 0x01 value: 200
11:01:33.209 [9] - flags: 0x01 value: 200
11:01:33.209 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:33.209 --T-> fir: 1 fin: 1 seq: 0
11:01:33.209 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:01:33.209 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:01:33.209 C0 C1 00 7D 3D
11:01:33.210 [PLG] Verified the current value of 10 analog input(s)
11:01:33.210 step: 15
11:01:33.210 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:01:33.210 - g32v0, All Objects
11:01:33.210 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:01:33.210 g32v0, All Objects
11:01:33.210 --T-> fir: 1 fin: 1 seq: 0
11:01:33.210 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:33.210 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:33.210 C0 C2 01 20 00 06 64 C0
11:01:33.210 step: 16
11:01:33.210 - Read a single fragment response w/ sequence(0x02)
11:01:33.210 - Verify that the response is empty
11:01:33.210 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
11:01:33.210 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:01:33.210 C2 C2 81 90 00 3E A2
11:01:33.210 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:01:33.210 <-T-- fir: 1 fin: 1 seq: 2
11:01:33.210 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
11:01:33.210 Passed procedure: 8.19.2.2