| 10:56:15.721 | Running procedure: 8.2.1.2.15 | |
| 10:56:15.722 | This procedure is enabled because the following options: | |
| 10:56:15.722 | - supports.binaryOutput.commands == true | |
| 10:56:15.722 | step: 2 | |
| 10:56:15.722 | - Tell a manual tester: Watch binary output 0 during this procedure: it should not operate at all, after the OPERATE in step 4 or the one in step 7. You'll be asked what you saw after the steps, so make sure you can tell one operation from two (e.g. a counter, or an on-time long enough to see). Get ready, then press ENTER. | |
| 10:56:15.722 | - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 | |
| 10:56:15.722 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:15.722 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:15.723 | --A-> | Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 |
| 10:56:15.723 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:15.723 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:15.723 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:15.723 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:15.723 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:15.723 | C0 C0 03 0C 01 17 01 00 03 01 64 00 00 00 C8 00 FD 11 | |
| 10:56:15.723 | 00 00 00 FF FF | |
| 10:56:15.723 | step: 3 | |
| 10:56:15.723 | - Read a single fragment response w/ sequence(0x00) | |
| 10:56:15.723 | - Verify the response contains the exact object header: | |
| 10:56:15.723 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:15.723 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:15.723 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 10:56:15.724 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:15.724 | C0 C0 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 9C 9A | |
| 10:56:15.724 | C8 00 00 00 00 78 FB | |
| 10:56:15.724 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:15.724 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 10:56:15.724 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime) |
| 10:56:15.724 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:15.724 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:15.724 | step: 4 | |
| 10:56:15.724 | - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 10:56:15.724 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:15.724 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:15.724 | --A-> | Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 10:56:15.724 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:15.724 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:15.724 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:15.725 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:15.725 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:15.725 | C0 C2 04 0C 01 17 01 00 03 01 64 00 00 00 C8 00 1D 75 | |
| 10:56:15.725 | 00 00 00 FF FF | |
| 10:56:15.725 | step: 5 | |
| 10:56:15.725 | - Read a single fragment response w/ sequence(0x02) | |
| 10:56:15.725 | - Verify the response contains the exact object header: | |
| 10:56:15.725 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:15.725 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 2 (NO_SELECT) | |
| 10:56:15.726 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:15.726 | C1 C2 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 20 0B | |
| 10:56:15.726 | C8 00 00 00 02 C4 97 | |
| 10:56:15.726 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:15.726 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 10:56:15.726 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 10:56:15.726 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:15.726 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 2 (NO_SELECT) | |
| 10:56:15.726 | step: 6 | |
| 10:56:15.726 | - Check that no binary control point operated | |
| 10:56:16.727 | [PLG] | Binary output did NOT operate |
| 10:56:16.727 | step: 7 | |
| 10:56:16.727 | - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 10:56:16.727 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:16.727 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:16.727 | --A-> | Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 10:56:16.727 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:16.727 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS) | |
| 10:56:16.728 | --T-> | fir: 1 fin: 1 seq: 0 |
| 10:56:16.728 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1 |
| 10:56:16.728 | --P-> | 05 64 18 C4 00 04 01 00 5B 61 |
| 10:56:16.728 | C0 C1 04 0C 01 17 01 00 03 01 64 00 00 00 C8 00 35 C7 | |
| 10:56:16.728 | 00 00 00 FF FF | |
| 10:56:16.728 | step: 8 | |
| 10:56:16.728 | - Read a single fragment response w/ sequence(0x01) | |
| 10:56:16.728 | - Verify the response contains the exact object header: | |
| 10:56:16.728 | - g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:16.728 | - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 2 (NO_SELECT) | |
| 10:56:16.728 | <-P-- | 05 64 1A 44 01 00 00 04 A6 F0 |
| 10:56:16.728 | C2 C1 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 9C 6F | |
| 10:56:16.728 | C8 00 00 00 02 C4 97 | |
| 10:56:16.729 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024 |
| 10:56:16.729 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 10:56:16.729 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 10:56:16.729 | g12v1, 1-Byte Count and Index, count: 1 | |
| 10:56:16.729 | [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 2 (NO_SELECT) | |
| 10:56:16.729 | step: 9 | |
| 10:56:16.729 | - Check that no binary control point operated | |
| 10:56:17.730 | [PLG] | Binary output did NOT operate |
| 10:56:17.730 | Passed procedure: 8.2.1.2.15 |