10:56:20.661		Running procedure: 8.2.3.2.1
10:56:20.663		step: 1
10:56:20.663		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:20.663		- g12v1, 1-Byte Count and Index, count: 1
10:56:20.663		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:20.663	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:20.663		g12v1, 1-Byte Count and Index, count: 1
10:56:20.663		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:20.663	--T->	fir: 1 fin: 1 seq: 0
10:56:20.663	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
10:56:20.663	--P->	05 64 18 C4 00 04 01 00 5B 61
10:56:20.663		C0 C0 06 0C 01 17 01 00 03 01 64 00 00 00 C8 00 CD D4
10:56:20.663		00 00 00 FF FF
10:56:20.663		step: 2
10:56:20.663		- Verify that no link layer frames are received within 2000 ms
10:56:22.666		frame receive timeout
10:56:22.666		step: 3
10:56:22.666		- For a DUT without binary outputs, this section ends here
10:56:22.666		step: 4
10:56:22.666		- Check that binary control point 0 operate
10:56:22.666	[PLG]	Binary output 0 did operate
10:56:22.666		Passed procedure: 8.2.3.2.1