8.2.4.2 Test Procedure (revision 2.7, subset level 2)

Device under test: Step Function I/O dnp3 outstation

All results
10:56:29.383 Running procedure: 8.2.4.2
10:56:29.388 This procedure is enabled because the following options:
10:56:29.388 - supports.binaryOutput.commands == true
10:56:29.388 step: 1
10:56:29.388 - Device supports up to 4 command objects in a single request
10:56:29.389 step: 2
10:56:29.389 - Sending 4 commands
10:56:29.389 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:29.389 - g12v1, 2-Byte Count and Index, count: 4
10:56:29.389 - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.389 - [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.389 - [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.389 - [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.389 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:56:29.389 g12v1, 2-Byte Count and Index, count: 4
10:56:29.389 [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.389 [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.389 [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.389 [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.389 --T-> fir: 1 fin: 1 seq: 0
10:56:29.389 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 65 dest: 1024 src: 1
10:56:29.389 --P-> 05 64 41 C4 00 04 01 00 DC 98
10:56:29.389 C0 C0 03 0C 01 28 04 00 0A 00 03 01 64 00 00 00 28 EE
10:56:29.389 C8 00 00 00 00 0B 00 03 01 64 00 00 00 C8 00 00 BE A4
10:56:29.389 00 00 0C 00 03 01 64 00 00 00 C8 00 00 00 00 0D 0F 69
10:56:29.389 00 03 01 64 00 00 00 C8 00 00 00 00 A3 5D
10:56:29.390 step: 3
10:56:29.390 - Read a single fragment response w/ sequence(0x00)
10:56:29.390 - Verify the response contains the exact object header:
10:56:29.390 - g12v1, 2-Byte Count and Index, count: 4
10:56:29.390 - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.390 - [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.390 - [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.390 - [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.390 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:56:29.390 <-P-- 05 64 43 44 01 00 00 04 21 09
10:56:29.390 C0 C0 81 90 00 0C 01 28 04 00 0A 00 03 01 64 00 38 92
10:56:29.390 00 00 C8 00 00 00 00 0B 00 03 01 64 00 00 00 C8 83 EE
10:56:29.390 00 00 00 00 0C 00 03 01 64 00 00 00 C8 00 00 00 DB CB
10:56:29.390 00 0D 00 03 01 64 00 00 00 C8 00 00 00 00 27 50
10:56:29.390 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 67 dest: 1 src: 1024
10:56:29.390 <-T-- fir: 1 fin: 1 seq: 0
10:56:29.391 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
10:56:29.391 g12v1, 2-Byte Count and Index, count: 4
10:56:29.391 [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 step: 4
10:56:29.391 - Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:56:29.391 - g12v1, 2-Byte Count and Index, count: 4
10:56:29.391 - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 - [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 - [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 - [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 --A-> Operate(0x04) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:56:29.391 g12v1, 2-Byte Count and Index, count: 4
10:56:29.391 [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 --T-> fir: 1 fin: 1 seq: 0
10:56:29.391 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 65 dest: 1024 src: 1
10:56:29.391 --P-> 05 64 41 C4 00 04 01 00 DC 98
10:56:29.391 C0 C1 04 0C 01 28 04 00 0A 00 03 01 64 00 00 00 E0 38
10:56:29.391 C8 00 00 00 00 0B 00 03 01 64 00 00 00 C8 00 00 BE A4
10:56:29.391 00 00 0C 00 03 01 64 00 00 00 C8 00 00 00 00 0D 0F 69
10:56:29.391 00 03 01 64 00 00 00 C8 00 00 00 00 A3 5D
10:56:29.391 step: 5
10:56:29.391 - Read a single fragment response w/ sequence(0x01)
10:56:29.391 - Verify the response contains the exact object header:
10:56:29.391 - g12v1, 2-Byte Count and Index, count: 4
10:56:29.391 - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 - [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 - [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 - [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.391 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:56:29.392 <-P-- 05 64 43 44 01 00 00 04 21 09
10:56:29.392 C1 C1 81 90 00 0C 01 28 04 00 0A 00 03 01 64 00 AC B1
10:56:29.392 00 00 C8 00 00 00 00 0B 00 03 01 64 00 00 00 C8 83 EE
10:56:29.392 00 00 00 00 0C 00 03 01 64 00 00 00 C8 00 00 00 DB CB
10:56:29.392 00 0D 00 03 01 64 00 00 00 C8 00 00 00 00 27 50
10:56:29.392 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 67 dest: 1 src: 1024
10:56:29.392 <-T-- fir: 1 fin: 1 seq: 1
10:56:29.392 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
10:56:29.392 g12v1, 2-Byte Count and Index, count: 4
10:56:29.392 [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.392 [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.392 [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.392 [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.392 step: 6
10:56:29.392 - Check that binary control point 10 operate
10:56:29.392 - Check that binary control point 11 operate
10:56:29.392 - Check that binary control point 12 operate
10:56:29.392 - Check that binary control point 13 operate
10:56:29.393 [PLG] Binary output 10 did operate
10:56:29.393 [PLG] Binary output 11 did operate
10:56:29.393 [PLG] Binary output 12 did operate
10:56:29.393 [PLG] Binary output 13 did operate
10:56:29.393 step: 7
10:56:29.393 - number of installed points > max commands per request
10:56:29.393 step: 8
10:56:29.393 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:56:29.393 - g12v1, 2-Byte Count and Index, count: 5
10:56:29.393 - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 - [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 - [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 - [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 - [19] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:56:29.393 g12v1, 2-Byte Count and Index, count: 5
10:56:29.393 [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 [19] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.393 --T-> fir: 1 fin: 1 seq: 0
10:56:29.393 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 78 dest: 1024 src: 1
10:56:29.393 --P-> 05 64 4E C4 00 04 01 00 3E DC
10:56:29.393 C0 C2 03 0C 01 28 05 00 0A 00 03 01 64 00 00 00 7A F1
10:56:29.393 C8 00 00 00 00 0B 00 03 01 64 00 00 00 C8 00 00 BE A4
10:56:29.393 00 00 0C 00 03 01 64 00 00 00 C8 00 00 00 00 0D 0F 69
10:56:29.393 00 03 01 64 00 00 00 C8 00 00 00 00 13 00 03 01 7D DA
10:56:29.393 64 00 00 00 C8 00 00 00 00 53 A5
10:56:29.394 step: 9
10:56:29.394 - Read a single fragment response w/ sequence(0x02)
10:56:29.394 - Verify the response contains the exact object header:
10:56:29.394 - g12v1, 2-Byte Count and Index, count: 5
10:56:29.394 - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 - [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 - [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 - [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 - [19] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 8 (TOO_MANY_OPS)
10:56:29.394 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:56:29.394 <-P-- 05 64 50 44 01 00 00 04 B0 E2
10:56:29.394 C2 C2 81 90 00 0C 01 28 05 00 0A 00 03 01 64 00 02 C3
10:56:29.394 00 00 C8 00 00 00 00 0B 00 03 01 64 00 00 00 C8 83 EE
10:56:29.394 00 00 00 00 0C 00 03 01 64 00 00 00 C8 00 00 00 DB CB
10:56:29.394 00 0D 00 03 01 64 00 00 00 C8 00 00 00 00 13 00 C4 63
10:56:29.394 03 01 64 00 00 00 C8 00 00 00 08 2A A2
10:56:29.394 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 80 dest: 1 src: 1024
10:56:29.394 <-T-- fir: 1 fin: 1 seq: 2
10:56:29.394 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
10:56:29.394 g12v1, 2-Byte Count and Index, count: 5
10:56:29.394 [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 [19] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 8 (TOO_MANY_OPS)
10:56:29.394 step: 10
10:56:29.394 - Devices that support control operations must support direct operate
10:56:29.394 step: 11
10:56:29.394 - Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:56:29.394 - g12v1, 2-Byte Count and Index, count: 5
10:56:29.394 - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 - [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 - [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 - [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 - [19] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 --A-> Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:56:29.394 g12v1, 2-Byte Count and Index, count: 5
10:56:29.394 [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 [19] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.394 --T-> fir: 1 fin: 1 seq: 0
10:56:29.395 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 78 dest: 1024 src: 1
10:56:29.395 --P-> 05 64 4E C4 00 04 01 00 3E DC
10:56:29.395 C0 C3 05 0C 01 28 05 00 0A 00 03 01 64 00 00 00 42 19
10:56:29.395 C8 00 00 00 00 0B 00 03 01 64 00 00 00 C8 00 00 BE A4
10:56:29.395 00 00 0C 00 03 01 64 00 00 00 C8 00 00 00 00 0D 0F 69
10:56:29.395 00 03 01 64 00 00 00 C8 00 00 00 00 13 00 03 01 7D DA
10:56:29.395 64 00 00 00 C8 00 00 00 00 53 A5
10:56:29.395 step: 12
10:56:29.395 - Read a single fragment response w/ sequence(0x03)
10:56:29.395 - Verify the response contains the exact object header:
10:56:29.395 - g12v1, 2-Byte Count and Index, count: 5
10:56:29.395 - [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.395 - [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.395 - [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.395 - [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.395 - [19] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 8 (TOO_MANY_OPS)
10:56:29.395 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:56:29.395 - Check that binary control point 10 operate
10:56:29.395 - Check that binary control point 11 operate
10:56:29.395 - Check that binary control point 12 operate
10:56:29.395 - Check that binary control point 13 operate
10:56:29.395 - Not verified by this tool: that the last point, refused with status 8, didn't operate
10:56:29.395 <-P-- 05 64 50 44 01 00 00 04 B0 E2
10:56:29.395 C3 C3 81 90 00 0C 01 28 05 00 0A 00 03 01 64 00 96 E0
10:56:29.395 00 00 C8 00 00 00 00 0B 00 03 01 64 00 00 00 C8 83 EE
10:56:29.395 00 00 00 00 0C 00 03 01 64 00 00 00 C8 00 00 00 DB CB
10:56:29.395 00 0D 00 03 01 64 00 00 00 C8 00 00 00 00 13 00 C4 63
10:56:29.395 03 01 64 00 00 00 C8 00 00 00 08 2A A2
10:56:29.395 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 80 dest: 1 src: 1024
10:56:29.395 <-T-- fir: 1 fin: 1 seq: 3
10:56:29.396 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
10:56:29.396 g12v1, 2-Byte Count and Index, count: 5
10:56:29.396 [10] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.396 [11] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.396 [12] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.396 [13] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.396 [19] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 8 (TOO_MANY_OPS)
10:56:29.396 [PLG] Binary output 10 did operate
10:56:29.396 [PLG] Binary output 11 did operate
10:56:29.396 [PLG] Binary output 12 did operate
10:56:29.396 [PLG] Binary output 13 did operate
10:56:29.396 step: 13
10:56:29.396 - Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
10:56:29.396 - g12v1, 2-Byte Count and Index, count: 1
10:56:29.396 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.396 - g12v1, 2-Byte Count and Index, count: 1
10:56:29.396 - [65535] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.396 --A-> Select(0x03) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
10:56:29.396 g12v1, 2-Byte Count and Index, count: 1
10:56:29.396 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.396 g12v1, 2-Byte Count and Index, count: 1
10:56:29.396 [65535] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.396 --T-> fir: 1 fin: 1 seq: 0
10:56:29.396 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 44 dest: 1024 src: 1
10:56:29.396 --P-> 05 64 2C C4 00 04 01 00 76 A5
10:56:29.396 C0 C4 03 0C 01 28 01 00 00 00 03 01 64 00 00 00 E4 9E
10:56:29.396 C8 00 00 00 00 0C 01 28 01 00 FF FF 03 01 64 00 10 0A
10:56:29.396 00 00 C8 00 00 00 00 78 FB
10:56:29.396 step: 14
10:56:29.396 - Read a single fragment response w/ sequence(0x04)
10:56:29.396 - Verify that the IIN field contains IIN(ParamError)
10:56:29.396 - Verify the response contains the exact object headers:
10:56:29.396 - g12v1, 2-Byte Count and Index, count: 1
10:56:29.396 - [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.396 - g12v1, 2-Byte Count and Index, count: 1
10:56:29.396 - [65535] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 4 (NOT_SUPPORTED)
10:56:29.397 <-P-- 05 64 2E 44 01 00 00 04 8B 34
10:56:29.397 C4 C4 81 90 04 0C 01 28 01 00 00 00 03 01 64 00 4E 8A
10:56:29.397 00 00 C8 00 00 00 00 0C 01 28 01 00 FF FF 03 01 45 FB
10:56:29.397 64 00 00 00 C8 00 00 00 04 2B 7C
10:56:29.397 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 46 dest: 1 src: 1024
10:56:29.397 <-T-- fir: 1 fin: 1 seq: 4
10:56:29.397 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime, ParamError)
10:56:29.397 g12v1, 2-Byte Count and Index, count: 1
10:56:29.397 [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:56:29.397 g12v1, 2-Byte Count and Index, count: 1
10:56:29.397 [65535] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 4 (NOT_SUPPORTED)
10:56:29.397 Passed procedure: 8.2.4.2