8.22.2.13 Double-bit Input Change With Relative Time, 0x07 (revision 2.7, subset level 2)

Device under test: Step Function I/O dnp3 outstation

All results
11:01:42.763 Running procedure: 8.22.2.13
11:01:42.763 This procedure is enabled because the following options:
11:01:42.763 - supports.doubleBitInput == true
11:01:42.763 - supports.doubleBitInputChangeEvents == true
11:01:42.763 - timesync.doubleBitInputChangeWithRelativeTime == true
11:01:42.763 step: 1
11:01:42.763 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:42.763 - g4v0, All Objects
11:01:42.764 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:42.764 g4v0, All Objects
11:01:42.764 --T-> fir: 1 fin: 1 seq: 0
11:01:42.764 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:42.764 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:42.764 C0 C1 01 04 00 06 05 23
11:01:42.764 steps: 2 to 3
11:01:42.764 - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16
11:01:42.764 - If the response carries data, verify that it asks for an application layer confirmation.
11:01:42.764 - Confirm each response that asks for a confirmation
11:01:42.764 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:01:42.764 C0 C1 81 90 00 73 EE
11:01:42.764 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:01:42.764 <-T-- fir: 1 fin: 1 seq: 0
11:01:42.764 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
11:01:42.764 step: 4
11:01:42.764 - Generate 10 Double-bit Binary Input Change Event(s)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185302764 (UNSYNCHRONIZED_TIME)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793185302765 (UNSYNCHRONIZED_TIME)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185302765 (UNSYNCHRONIZED_TIME)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793185302765 (UNSYNCHRONIZED_TIME)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185302765 (UNSYNCHRONIZED_TIME)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793185302765 (UNSYNCHRONIZED_TIME)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185302765 (UNSYNCHRONIZED_TIME)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793185302765 (UNSYNCHRONIZED_TIME)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185302765 (UNSYNCHRONIZED_TIME)
11:01:42.765 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793185302765 (UNSYNCHRONIZED_TIME)
11:01:42.765 The plugin reports the DUT's clock unsynchronized
11:01:42.765 step: 5
11:01:42.765 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:01:42.765 - g4v3, 1-Byte Count, count: 1
11:01:42.765 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:01:42.765 g4v3, 1-Byte Count, count: 1
11:01:42.765 --T-> fir: 1 fin: 1 seq: 0
11:01:42.765 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 12 dest: 1024 src: 1
11:01:42.765 --P-> 05 64 0C C4 00 04 01 00 F4 54
11:01:42.765 C0 C2 01 04 03 07 01 B8 26
11:01:42.765 steps: 6 to 11
11:01:42.765 - Read a single fragment response w/ sequence(0x02)
11:01:42.765 - Verify the device responds with the first Double-bit Binary event
11:01:42.765 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
11:01:42.765 - Verify that an application layer confirmation is requested.
11:01:42.765 - Verify that the response contains events of the variations List(g4v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07)
11:01:42.765 - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
11:01:42.765 - Verify that each relative-time event is preceded by a CTO object (Table 8-4)
11:01:42.765 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:01:42.765 - Confirm each response that asks for a confirmation
11:01:42.765 <-P-- 05 64 1E 44 01 00 00 04 C8 BD
11:01:42.765 C1 E2 81 92 00 33 02 07 01 EC 48 2C 82 A1 01 04 80 10
11:01:42.765 03 28 01 00 00 00 81 00 00 9A 2A
11:01:42.765 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 30 dest: 1 src: 1024
11:01:42.765 <-T-- fir: 1 fin: 1 seq: 1
11:01:42.765 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime, Class1Events)
11:01:42.765 g51v2, 1-Byte Count, count: 1
11:01:42.765 time: 1793185302764
11:01:42.765 g4v3, 2-Byte Count and Index, count: 1
11:01:42.765 [0] - flags: 0x81 cto: 0
11:01:42.765 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:01:42.765 --T-> fir: 1 fin: 1 seq: 0
11:01:42.765 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:01:42.765 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:01:42.765 C0 C2 00 D6 8D
11:01:42.765 [PLG] Verified first double-bit binary input point event
11:01:42.766 step: 12
11:01:42.766 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:01:42.766 - g4v3, 1-Byte Count, count: 9
11:01:42.766 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:01:42.766 g4v3, 1-Byte Count, count: 9
11:01:42.766 --T-> fir: 1 fin: 1 seq: 0
11:01:42.766 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 12 dest: 1024 src: 1
11:01:42.766 --P-> 05 64 0C C4 00 04 01 00 F4 54
11:01:42.766 C0 C3 01 04 03 07 09 D6 6C
11:01:42.766 steps: 13 to 14
11:01:42.766 - Read a single fragment response w/ sequence(0x03)
11:01:42.766 - Verify that the response holds the Double-bit Binary events generated that weren't reported before
11:01:42.766 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
11:01:42.766 - Verify that an application layer confirmation is requested.
11:01:42.766 - Verify that the response contains events of the variations List(g4v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07)
11:01:42.766 - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
11:01:42.766 - Verify that each relative-time event is preceded by a CTO object (Table 8-4)
11:01:42.766 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:01:42.766 - Confirm each response that asks for a confirmation
11:01:42.766 <-P-- 05 64 46 44 01 00 00 04 A8 F1
11:01:42.766 C2 E3 81 90 00 33 02 07 01 ED 48 2C 82 A1 01 04 18 49
11:01:42.766 03 28 09 00 00 00 41 00 00 00 00 81 00 00 00 00 09 E8
11:01:42.766 41 00 00 00 00 81 00 00 00 00 41 00 00 00 00 81 B2 55
11:01:42.766 00 00 00 00 41 00 00 00 00 81 00 00 00 00 41 00 4F 13
11:01:42.766 00 FF FF
11:01:42.766 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 70 dest: 1 src: 1024
11:01:42.766 <-T-- fir: 1 fin: 1 seq: 2
11:01:42.766 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
11:01:42.766 g51v2, 1-Byte Count, count: 1
11:01:42.766 time: 1793185302765
11:01:42.766 g4v3, 2-Byte Count and Index, count: 9
11:01:42.766 [0] - flags: 0x41 cto: 0
11:01:42.766 [0] - flags: 0x81 cto: 0
11:01:42.766 [0] - flags: 0x41 cto: 0
11:01:42.766 [0] - flags: 0x81 cto: 0
11:01:42.766 [0] - flags: 0x41 cto: 0
11:01:42.766 [0] - flags: 0x81 cto: 0
11:01:42.766 [0] - flags: 0x41 cto: 0
11:01:42.766 [0] - flags: 0x81 cto: 0
11:01:42.766 [0] - flags: 0x41 cto: 0
11:01:42.766 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:01:42.766 --T-> fir: 1 fin: 1 seq: 0
11:01:42.766 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:01:42.766 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:01:42.766 C0 C3 00 98 26
11:01:42.766 [PLG] Verified 9 double-bit binary input point event(s)
11:01:42.766 step: 15
11:01:42.766 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
11:01:42.766 - g4v0, All Objects
11:01:42.766 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
11:01:42.766 g4v0, All Objects
11:01:42.766 --T-> fir: 1 fin: 1 seq: 0
11:01:42.766 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:42.766 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:42.766 C0 C4 01 04 00 06 1B 8C
11:01:42.766 step: 16
11:01:42.766 - Read a single fragment response w/ sequence(0x04)
11:01:42.766 - Verify that the response is empty
11:01:42.766 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
11:01:42.766 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:01:42.766 C3 C4 81 90 00 BA 95
11:01:42.766 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:01:42.766 <-T-- fir: 1 fin: 1 seq: 3
11:01:42.766 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime)
11:01:42.767 Passed procedure: 8.22.2.13