| 11:01:43.224 | Running procedure: 8.22.2.15 | |
| 11:01:43.225 | This procedure is enabled because the following options: | |
| 11:01:43.225 | - supports.doubleBitInput == true | |
| 11:01:43.225 | - supports.doubleBitInputChangeEvents == true | |
| 11:01:43.225 | - timesync.doubleBitInputChangeWithRelativeTime == true | |
| 11:01:43.225 | step: 1 | |
| 11:01:43.225 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 | |
| 11:01:43.225 | - g4v0, All Objects | |
| 11:01:43.225 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 |
| 11:01:43.225 | g4v0, All Objects | |
| 11:01:43.225 | --T-> | fir: 1 fin: 1 seq: 0 |
| 11:01:43.225 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 11:01:43.225 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 11:01:43.225 | C0 C1 01 04 00 06 05 23 | |
| 11:01:43.225 | steps: 2 to 3 | |
| 11:01:43.225 | - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16 | |
| 11:01:43.225 | - If the response carries data, verify that it asks for an application layer confirmation. | |
| 11:01:43.225 | - Confirm each response that asks for a confirmation | |
| 11:01:43.225 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 11:01:43.225 | C0 C1 81 90 00 73 EE | |
| 11:01:43.225 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 11:01:43.225 | <-T-- | fir: 1 fin: 1 seq: 0 |
| 11:01:43.225 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime) |
| 11:01:43.225 | step: 4 | |
| 11:01:43.225 | - Change double-bit binary inputs several times, one or more of them, to create events | |
| 11:01:43.226 | [PLG] | Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185303225 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | [PLG] | Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793185303226 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | [PLG] | Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793185303226 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | [PLG] | Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793185303226 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | [PLG] | Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793185303226 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | [PLG] | Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793185303226 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | [PLG] | Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793185303226 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | [PLG] | Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793185303226 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | [PLG] | Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793185303226 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | [PLG] | Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793185303226 (UNSYNCHRONIZED_TIME) |
| 11:01:43.226 | The plugin reports the DUT's clock unsynchronized | |
| 11:01:43.226 | step: 5 | |
| 11:01:43.226 | - Wait for 70535 milliseconds | |
| 11:02:53.761 | step: 6 | |
| 11:02:53.761 | - Change double-bit binary inputs several times, one or more of them, to create events | |
| 11:02:53.762 | [PLG] | Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793185373761 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | [PLG] | Updated DBBI 1: value=DETERMINED_OFF, flags=41, timestamp=1793185373762 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | [PLG] | Updated DBBI 2: value=DETERMINED_OFF, flags=41, timestamp=1793185373762 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | [PLG] | Updated DBBI 3: value=DETERMINED_OFF, flags=41, timestamp=1793185373762 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | [PLG] | Updated DBBI 4: value=DETERMINED_OFF, flags=41, timestamp=1793185373762 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | [PLG] | Updated DBBI 5: value=DETERMINED_OFF, flags=41, timestamp=1793185373762 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | [PLG] | Updated DBBI 6: value=DETERMINED_OFF, flags=41, timestamp=1793185373762 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | [PLG] | Updated DBBI 7: value=DETERMINED_OFF, flags=41, timestamp=1793185373762 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | [PLG] | Updated DBBI 8: value=DETERMINED_OFF, flags=41, timestamp=1793185373762 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | [PLG] | Updated DBBI 9: value=DETERMINED_OFF, flags=41, timestamp=1793185373762 (UNSYNCHRONIZED_TIME) |
| 11:02:53.762 | The plugin reports the DUT's clock unsynchronized | |
| 11:02:53.762 | step: 7 | |
| 11:02:53.762 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 | |
| 11:02:53.762 | - g4v3, All Objects | |
| 11:02:53.762 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 11:02:53.762 | g4v3, All Objects | |
| 11:02:53.762 | --T-> | fir: 1 fin: 1 seq: 0 |
| 11:02:53.762 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 11:02:53.762 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 11:02:53.762 | C0 C2 01 04 03 06 A4 F6 | |
| 11:02:53.762 | steps: 8 to 14 | |
| 11:02:53.762 | - Read a single fragment response w/ sequence(0x02) | |
| 11:02:53.762 | - Verify that the response carries every Double-bit Binary event generated and not yet confirmed, in the order they occurred | |
| 11:02:53.762 | - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution | |
| 11:02:53.762 | - Verify that an application layer confirmation is requested. | |
| 11:02:53.762 | - Verify that the response contains events of the variations List(g4v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07) | |
| 11:02:53.762 | - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes | |
| 11:02:53.762 | - Verify that each relative-time event is preceded by a CTO object (Table 8-4) | |
| 11:02:53.762 | - Verify that the response contains at least two CTO headers (g51v1/g51v2), for the event batches generated more than 0xFFFF ms apart | |
| 11:02:53.762 | - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1). | |
| 11:02:53.762 | - Confirm each response that asks for a confirmation | |
| 11:02:53.762 | <-P-- | 05 64 8C 44 01 00 00 04 3D F2 |
| 11:02:53.762 | C1 E2 81 90 00 33 02 07 01 B9 4A 2C 82 A1 01 04 8D FC | |
| 11:02:53.762 | 03 28 0A 00 00 00 81 00 00 01 00 81 01 00 02 00 44 80 | |
| 11:02:53.762 | 81 01 00 03 00 81 01 00 04 00 81 01 00 05 00 81 E7 8E | |
| 11:02:53.762 | 01 00 06 00 81 01 00 07 00 81 01 00 08 00 81 01 12 22 | |
| 11:02:53.762 | 00 09 00 81 01 00 33 02 07 01 41 5E 2D 82 A1 01 82 F8 | |
| 11:02:53.762 | 04 03 28 0A 00 00 00 41 00 00 01 00 41 01 00 02 B1 59 | |
| 11:02:53.762 | 00 41 01 00 03 00 41 01 00 04 00 41 01 00 05 00 97 DC | |
| 11:02:53.762 | 41 01 00 06 00 41 01 00 07 00 41 01 00 08 00 41 A4 F9 | |
| 11:02:53.762 | 01 00 09 00 41 01 00 4B E8 | |
| 11:02:53.762 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 140 dest: 1 src: 1024 |
| 11:02:53.763 | <-T-- | fir: 1 fin: 1 seq: 1 |
| 11:02:53.763 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime) |
| 11:02:53.763 | g51v2, 1-Byte Count, count: 1 | |
| 11:02:53.763 | time: 1793185303225 | |
| 11:02:53.763 | g4v3, 2-Byte Count and Index, count: 10 | |
| 11:02:53.763 | [0] - flags: 0x81 cto: 0 | |
| 11:02:53.763 | [1] - flags: 0x81 cto: 1 | |
| 11:02:53.763 | [2] - flags: 0x81 cto: 1 | |
| 11:02:53.763 | [3] - flags: 0x81 cto: 1 | |
| 11:02:53.763 | [4] - flags: 0x81 cto: 1 | |
| 11:02:53.763 | [5] - flags: 0x81 cto: 1 | |
| 11:02:53.763 | [6] - flags: 0x81 cto: 1 | |
| 11:02:53.763 | [7] - flags: 0x81 cto: 1 | |
| 11:02:53.763 | [8] - flags: 0x81 cto: 1 | |
| 11:02:53.763 | [9] - flags: 0x81 cto: 1 | |
| 11:02:53.763 | g51v2, 1-Byte Count, count: 1 | |
| 11:02:53.763 | time: 1793185373761 | |
| 11:02:53.763 | g4v3, 2-Byte Count and Index, count: 10 | |
| 11:02:53.763 | [0] - flags: 0x41 cto: 0 | |
| 11:02:53.763 | [1] - flags: 0x41 cto: 1 | |
| 11:02:53.763 | [2] - flags: 0x41 cto: 1 | |
| 11:02:53.763 | [3] - flags: 0x41 cto: 1 | |
| 11:02:53.763 | [4] - flags: 0x41 cto: 1 | |
| 11:02:53.763 | [5] - flags: 0x41 cto: 1 | |
| 11:02:53.763 | [6] - flags: 0x41 cto: 1 | |
| 11:02:53.763 | [7] - flags: 0x41 cto: 1 | |
| 11:02:53.763 | [8] - flags: 0x41 cto: 1 | |
| 11:02:53.763 | [9] - flags: 0x41 cto: 1 | |
| 11:02:53.763 | --A-> | Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 |
| 11:02:53.763 | --T-> | fir: 1 fin: 1 seq: 0 |
| 11:02:53.763 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1 |
| 11:02:53.763 | --P-> | 05 64 08 C4 00 04 01 00 9A 19 |
| 11:02:53.763 | C0 C2 00 D6 8D | |
| 11:02:53.763 | [PLG] | Verified 20 double-bit binary input point event(s) |
| 11:02:53.763 | step: 15 | |
| 11:02:53.763 | - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 | |
| 11:02:53.763 | - g4v3, All Objects | |
| 11:02:53.763 | --A-> | Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 |
| 11:02:53.763 | g4v3, All Objects | |
| 11:02:53.763 | --T-> | fir: 1 fin: 1 seq: 0 |
| 11:02:53.763 | --L-> | master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1 |
| 11:02:53.763 | --P-> | 05 64 0B C4 00 04 01 00 CA 8A |
| 11:02:53.763 | C0 C3 01 04 03 06 A2 D5 | |
| 11:02:53.763 | step: 16 | |
| 11:02:53.763 | - Read a single fragment response w/ sequence(0x03) | |
| 11:02:53.763 | - Verify that the response is empty | |
| 11:02:53.763 | - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported) | |
| 11:02:53.764 | <-P-- | 05 64 0A 44 01 00 00 04 67 88 |
| 11:02:53.764 | C2 C3 81 90 00 D6 60 | |
| 11:02:53.764 | <-L-- | master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024 |
| 11:02:53.764 | <-T-- | fir: 1 fin: 1 seq: 2 |
| 11:02:53.764 | <-A-- | Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime) |
| 11:02:53.764 | Passed procedure: 8.22.2.15 |