8.22.2.5 Double-bit Input Change Without Confirm (revision 2.7, subset level 2)

Device under test: Step Function I/O dnp3 outstation

All results
11:01:34.885 Running procedure: 8.22.2.5
11:01:34.886 This procedure is enabled because the following options:
11:01:34.886 - supports.doubleBitInput == true
11:01:34.886 - supports.doubleBitInputChangeEvents == true
11:01:34.886 note:
11:01:34.886 - These steps follow 8.14.2.5. The document's step 11, a check for remaining events, has no request before it, so steps 11 to 20 below are the document's steps 12 to 21
11:01:34.886 step: 1
11:01:34.886 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:34.886 - g4v0, All Objects
11:01:34.886 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
11:01:34.886 g4v0, All Objects
11:01:34.886 --T-> fir: 1 fin: 1 seq: 0
11:01:34.886 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:34.886 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:34.886 C0 C1 01 04 00 06 05 23
11:01:34.886 steps: 2 to 3
11:01:34.886 - Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16
11:01:34.886 - If the response carries data, verify that it asks for an application layer confirmation.
11:01:34.886 - Confirm each response that asks for a confirmation
11:01:34.886 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:01:34.886 C0 C1 81 90 00 73 EE
11:01:34.886 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:01:34.886 <-T-- fir: 1 fin: 1 seq: 0
11:01:34.887 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, NeedTime)
11:01:34.887 step: 4
11:01:34.887 - Change double-bit binary inputs several times, one or more of them, to create events
11:01:34.887 [PLG] Updated DBBI 0: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 [PLG] Updated DBBI 1: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 [PLG] Updated DBBI 2: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 [PLG] Updated DBBI 3: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 [PLG] Updated DBBI 4: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 [PLG] Updated DBBI 5: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 [PLG] Updated DBBI 6: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 [PLG] Updated DBBI 7: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 [PLG] Updated DBBI 8: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 [PLG] Updated DBBI 9: value=DETERMINED_ON, flags=81, timestamp=1793185294887 (UNSYNCHRONIZED_TIME)
11:01:34.887 The plugin reports the DUT's clock unsynchronized
11:01:34.887 step: 5
11:01:34.887 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:01:34.887 - g4v0, All Objects
11:01:34.887 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
11:01:34.887 g4v0, All Objects
11:01:34.887 --T-> fir: 1 fin: 1 seq: 0
11:01:34.887 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:34.887 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:34.887 C0 C2 01 04 00 06 0F 46
11:01:34.887 steps: 6 to 10
11:01:34.887 - Read a single fragment response w/ sequence(0x02)
11:01:34.887 - Verify that the response holds every Double-bit Binary event generated
11:01:34.887 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
11:01:34.887 - Verify that an application layer confirmation is requested.
11:01:34.887 - Verify that the response contains events of the variations List(g4v1, g4v2, g4v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07)
11:01:34.887 - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
11:01:34.887 - Verify that each relative-time event is preceded by a CTO object (Table 8-4)
11:01:34.887 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:01:34.888 <-P-- 05 64 2D 44 01 00 00 04 DB A7
11:01:34.888 C1 E2 81 90 00 04 01 28 0A 00 00 00 81 01 00 81 E2 F3
11:01:34.888 02 00 81 03 00 81 04 00 81 05 00 81 06 00 81 07 7C AC
11:01:34.888 00 81 08 00 81 09 00 81 A0 4C
11:01:34.888 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 45 dest: 1 src: 1024
11:01:34.888 <-T-- fir: 1 fin: 1 seq: 1
11:01:34.888 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime)
11:01:34.888 g4v1, 2-Byte Count and Index, count: 10
11:01:34.888 [0] - flags: 0x81
11:01:34.888 [1] - flags: 0x81
11:01:34.888 [2] - flags: 0x81
11:01:34.888 [3] - flags: 0x81
11:01:34.888 [4] - flags: 0x81
11:01:34.888 [5] - flags: 0x81
11:01:34.888 [6] - flags: 0x81
11:01:34.888 [7] - flags: 0x81
11:01:34.888 [8] - flags: 0x81
11:01:34.888 [9] - flags: 0x81
11:01:34.888 [PLG] Verified 10 double-bit binary input point event(s)
11:01:34.888 step: 11
11:01:34.888 - Withhold the application-layer confirmation for this response.
11:01:34.888 steps: 12 to 13
11:01:34.888 - Expect no response within 6000 ms.
11:01:40.894 step: 14
11:01:40.894 - Change double-bit binary inputs several times, one or more of them, to create events
11:01:40.895 [PLG] Updated DBBI 0: value=DETERMINED_OFF, flags=41, timestamp=1793185300894 (UNSYNCHRONIZED_TIME)
11:01:40.895 [PLG] Updated DBBI 1: value=DETERMINED_OFF, flags=41, timestamp=1793185300895 (UNSYNCHRONIZED_TIME)
11:01:40.895 [PLG] Updated DBBI 2: value=DETERMINED_OFF, flags=41, timestamp=1793185300895 (UNSYNCHRONIZED_TIME)
11:01:40.895 [PLG] Updated DBBI 3: value=DETERMINED_OFF, flags=41, timestamp=1793185300895 (UNSYNCHRONIZED_TIME)
11:01:40.895 [PLG] Updated DBBI 4: value=DETERMINED_OFF, flags=41, timestamp=1793185300895 (UNSYNCHRONIZED_TIME)
11:01:40.895 [PLG] Updated DBBI 5: value=DETERMINED_OFF, flags=41, timestamp=1793185300895 (UNSYNCHRONIZED_TIME)
11:01:40.895 [PLG] Updated DBBI 6: value=DETERMINED_OFF, flags=41, timestamp=1793185300895 (UNSYNCHRONIZED_TIME)
11:01:40.895 [PLG] Updated DBBI 7: value=DETERMINED_OFF, flags=41, timestamp=1793185300895 (UNSYNCHRONIZED_TIME)
11:01:40.895 [PLG] Updated DBBI 8: value=DETERMINED_OFF, flags=41, timestamp=1793185300895 (UNSYNCHRONIZED_TIME)
11:01:40.895 [PLG] Updated DBBI 9: value=DETERMINED_OFF, flags=41, timestamp=1793185300895 (UNSYNCHRONIZED_TIME)
11:01:40.895 The plugin reports the DUT's clock unsynchronized
11:01:40.895 step: 15
11:01:40.895 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:01:40.895 - g4v0, All Objects
11:01:40.895 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:01:40.895 g4v0, All Objects
11:01:40.895 --T-> fir: 1 fin: 1 seq: 0
11:01:40.895 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:40.895 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:40.895 C0 C3 01 04 00 06 09 65
11:01:40.895 steps: 16 to 18
11:01:40.895 - Read a single fragment response w/ sequence(0x03)
11:01:40.895 - Verify that the response carries every Double-bit Binary event generated and not yet confirmed, in the order they occurred
11:01:40.895 - If the events carry timestamps, verify that the gaps between them match the gaps between when the events were generated, to the Device Profile's resolution
11:01:40.895 - Verify that an application layer confirmation is requested.
11:01:40.895 - Verify that the response contains events of the variations List(g4v1, g4v2, g4v3), and besides them only CTOs (g51v1 or g51v2, qualifier 0x07)
11:01:40.895 - Verify that the event objects are prefixed with 1-octet (qualifier 0x17) or 2-octet (qualifier 0x28) indexes
11:01:40.895 - Verify that each relative-time event is preceded by a CTO object (Table 8-4)
11:01:40.895 - Verify that the flags behave as the note on flags in Section 2 requires (Note 5 in 2.7, Note 6 in 3.1r1).
11:01:40.895 - Confirm each response that asks for a confirmation
11:01:40.896 <-P-- 05 64 4B 44 01 00 00 04 FD 93
11:01:40.896 C2 E3 81 90 00 04 01 28 14 00 00 00 81 01 00 81 CB A3
11:01:40.896 02 00 81 03 00 81 04 00 81 05 00 81 06 00 81 07 7C AC
11:01:40.896 00 81 08 00 81 09 00 81 00 00 41 01 00 41 02 00 5E 12
11:01:40.896 41 03 00 41 04 00 41 05 00 41 06 00 41 07 00 41 66 3A
11:01:40.896 08 00 41 09 00 41 DD 10
11:01:40.896 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 75 dest: 1 src: 1024
11:01:40.896 <-T-- fir: 1 fin: 1 seq: 2
11:01:40.896 <-A-- Response(0x81) fir: 1 fin: 1 con: 1 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
11:01:40.896 g4v1, 2-Byte Count and Index, count: 20
11:01:40.896 [0] - flags: 0x81
11:01:40.896 [1] - flags: 0x81
11:01:40.896 [2] - flags: 0x81
11:01:40.896 [3] - flags: 0x81
11:01:40.896 [4] - flags: 0x81
11:01:40.896 [5] - flags: 0x81
11:01:40.896 [6] - flags: 0x81
11:01:40.896 [7] - flags: 0x81
11:01:40.896 [8] - flags: 0x81
11:01:40.896 [9] - flags: 0x81
11:01:40.896 [0] - flags: 0x41
11:01:40.896 [1] - flags: 0x41
11:01:40.896 [2] - flags: 0x41
11:01:40.896 [3] - flags: 0x41
11:01:40.896 [4] - flags: 0x41
11:01:40.896 [5] - flags: 0x41
11:01:40.896 [6] - flags: 0x41
11:01:40.896 [7] - flags: 0x41
11:01:40.896 [8] - flags: 0x41
11:01:40.896 [9] - flags: 0x41
11:01:40.896 --A-> Confirm(0x00) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
11:01:40.896 --T-> fir: 1 fin: 1 seq: 0
11:01:40.896 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 8 dest: 1024 src: 1
11:01:40.896 --P-> 05 64 08 C4 00 04 01 00 9A 19
11:01:40.896 C0 C3 00 98 26
11:01:40.896 [PLG] Verified 20 double-bit binary input point event(s)
11:01:40.896 step: 19
11:01:40.896 - Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
11:01:40.896 - g4v0, All Objects
11:01:40.896 --A-> Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
11:01:40.896 g4v0, All Objects
11:01:40.897 --T-> fir: 1 fin: 1 seq: 0
11:01:40.897 --L-> master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
11:01:40.897 --P-> 05 64 0B C4 00 04 01 00 CA 8A
11:01:40.897 C0 C4 01 04 00 06 1B 8C
11:01:40.897 step: 20
11:01:40.897 - Read a single fragment response w/ sequence(0x04)
11:01:40.897 - Verify that the response is empty
11:01:40.897 - Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
11:01:40.897 <-P-- 05 64 0A 44 01 00 00 04 67 88
11:01:40.897 C3 C4 81 90 00 BA 95
11:01:40.897 <-L-- master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
11:01:40.897 <-T-- fir: 1 fin: 1 seq: 3
11:01:40.897 <-A-- Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime)
11:01:40.897 Passed procedure: 8.22.2.5