10:57:19.627		Running procedure: 8.6.4.2
10:57:19.632		This procedure is enabled because the following options:
10:57:19.632		- supports.globalRemoteSupervisoryControl == true
10:57:19.632		- supports.binaryOutput.status == true
10:57:19.632		- supports.binaryOutput.commands == true
10:57:19.632		step: 1.a
10:57:19.632		- Set the DUT's remote supervisory control to 'Enabled' or 'Remote', globally and for every point
10:57:19.634	[PLG]	Every binary output is under remote control
10:57:19.634		step: 1.b
10:57:19.634		- Binary output 0, the one the controls go to, must be online and have no exception flags
10:57:19.634		step: 1.c
10:57:19.634		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:57:19.634		- g10v0, All Objects
10:57:19.634	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:57:19.634		g10v0, All Objects
10:57:19.634	--T->	fir: 1 fin: 1 seq: 0
10:57:19.634	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:57:19.634	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:57:19.634		C0 C0 01 0A 00 06 53 98
10:57:19.635		steps: 1.d to 1.e
10:57:19.635		- Read any number of valid responses beginning w/ sequence(0x00) and incrementing by 1 modulo 16
10:57:19.635		- Verify that the response contains objects
10:57:19.635		- Verify that the device responds with only variations: Set(g10v1, g10v2)
10:57:19.635		- Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes
10:57:19.635		- Verify that the IIN field does not contain bits IIN(LocalControl)
10:57:19.635		- Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
10:57:19.635		- Note each binary output's flags, to compare the later reads with
10:57:19.635		- Verify that binary output(s) 0 are online, with no exception flags
10:57:19.635		- Confirm each response that asks for a confirmation
10:57:19.635	<-P--	05 64 25 44 01 00 00 04 07 3D
10:57:19.635		C0 C0 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 3A 43
10:57:19.635		01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3
10:57:19.635	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024
10:57:19.635	<-T--	fir: 1 fin: 1 seq: 0
10:57:19.635	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 IIN(DeviceRestart, NeedTime)
10:57:19.635		g10v2, 2-Byte Start/Stop, start: 0 stop: 19
10:57:19.635		[0] - flags: 0x01
10:57:19.635		[1] - flags: 0x01
10:57:19.635		[2] - flags: 0x01
10:57:19.635		[3] - flags: 0x01
10:57:19.635		[4] - flags: 0x01
10:57:19.635		[5] - flags: 0x01
10:57:19.635		[6] - flags: 0x01
10:57:19.635		[7] - flags: 0x01
10:57:19.635		[8] - flags: 0x01
10:57:19.635		[9] - flags: 0x01
10:57:19.635		[10] - flags: 0x01
10:57:19.635		[11] - flags: 0x01
10:57:19.635		[12] - flags: 0x01
10:57:19.635		[13] - flags: 0x01
10:57:19.635		[14] - flags: 0x01
10:57:19.635		[15] - flags: 0x01
10:57:19.635		[16] - flags: 0x01
10:57:19.635		[17] - flags: 0x01
10:57:19.635		[18] - flags: 0x01
10:57:19.635		[19] - flags: 0x01
10:57:19.639		step: 1.f
10:57:19.639		- Set the DUT's global remote supervisory switch to 'Disabled' or 'Local'
10:57:19.640	[PLG]	Global remote supervisory control was enabled
10:57:19.640		step: 1.g
10:57:19.640		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:57:19.640		- g10v0, All Objects
10:57:19.640	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01
10:57:19.640		g10v0, All Objects
10:57:19.640	--T->	fir: 1 fin: 1 seq: 0
10:57:19.640	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:57:19.640	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:57:19.640		C0 C1 01 0A 00 06 55 BB
10:57:19.640		steps: 1.h to 1.i
10:57:19.640		- Read any number of valid responses beginning w/ sequence(0x01) and incrementing by 1 modulo 16
10:57:19.640		- Verify that the response contains objects
10:57:19.640		- Verify that the device responds with only variations: Set(g10v1, g10v2)
10:57:19.640		- Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes
10:57:19.640		- Verify that the IIN field contains IIN(LocalControl)
10:57:19.640		- Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
10:57:19.640		- Verify that each binary output cleared ONLINE, that every binary output kept the state and other flags it had in the first read
10:57:19.640		- Confirm each response that asks for a confirmation
10:57:19.641	<-P--	05 64 25 44 01 00 00 04 07 3D
10:57:19.641		C1 C1 81 B0 00 0A 02 01 00 00 13 00 00 00 00 00 3F E7
10:57:19.641		00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 FF FF
10:57:19.641	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024
10:57:19.641	<-T--	fir: 1 fin: 1 seq: 1
10:57:19.641	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x01 IIN(DeviceRestart, LocalControl, NeedTime)
10:57:19.641		g10v2, 2-Byte Start/Stop, start: 0 stop: 19
10:57:19.641		[0] - flags: 0x00
10:57:19.641		[1] - flags: 0x00
10:57:19.641		[2] - flags: 0x00
10:57:19.641		[3] - flags: 0x00
10:57:19.641		[4] - flags: 0x00
10:57:19.641		[5] - flags: 0x00
10:57:19.641		[6] - flags: 0x00
10:57:19.641		[7] - flags: 0x00
10:57:19.641		[8] - flags: 0x00
10:57:19.641		[9] - flags: 0x00
10:57:19.641		[10] - flags: 0x00
10:57:19.641		[11] - flags: 0x00
10:57:19.641		[12] - flags: 0x00
10:57:19.641		[13] - flags: 0x00
10:57:19.641		[14] - flags: 0x00
10:57:19.641		[15] - flags: 0x00
10:57:19.641		[16] - flags: 0x00
10:57:19.641		[17] - flags: 0x00
10:57:19.641		[18] - flags: 0x00
10:57:19.641		[19] - flags: 0x00
10:57:19.642		step: 1.j
10:57:19.642		- Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:57:19.642		- g12v1, 1-Byte Count and Index, count: 1
10:57:19.642		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:57:19.642	--A->	Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:57:19.642		g12v1, 1-Byte Count and Index, count: 1
10:57:19.642		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:57:19.642	--T->	fir: 1 fin: 1 seq: 0
10:57:19.642	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
10:57:19.642	--P->	05 64 18 C4 00 04 01 00 5B 61
10:57:19.642		C0 C2 05 0C 01 17 01 00 03 01 64 00 00 00 C8 00 ED 4B
10:57:19.642		00 00 00 FF FF
10:57:19.642		step: 1.k
10:57:19.642		- Read a single fragment response w/ sequence(0x02)
10:57:19.642		- Verify the response contains the exact object header:
10:57:19.642		- g12v1, 1-Byte Count and Index, count: 1
10:57:19.642		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 7 (LOCAL)
10:57:19.642		- Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:57:19.642		- Verify that the IIN field contains IIN(LocalControl)
10:57:19.642	<-P--	05 64 1A 44 01 00 00 04 A6 F0
10:57:19.642		C2 C2 81 B0 00 0C 01 17 01 00 03 01 64 00 00 00 65 1C
10:57:19.642		C8 00 00 00 07 E2 78
10:57:19.642	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
10:57:19.642	<-T--	fir: 1 fin: 1 seq: 2
10:57:19.643	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, LocalControl, NeedTime)
10:57:19.643		g12v1, 1-Byte Count and Index, count: 1
10:57:19.643		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 7 (LOCAL)
10:57:19.643		step: 1.l
10:57:19.643		- Check that no binary control point operated
10:57:20.644	[PLG]	Binary output did NOT operate
10:57:20.644		step: 1.m
10:57:20.644		- Set the DUT's remote supervisory control to 'Enabled' or 'Remote', globally and for every point
10:57:20.644	[PLG]	Every binary output is under remote control
10:57:20.644		step: 1.n
10:57:20.644		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:57:20.644		- g10v0, All Objects
10:57:20.644	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:57:20.644		g10v0, All Objects
10:57:20.644	--T->	fir: 1 fin: 1 seq: 0
10:57:20.644	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:57:20.644	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:57:20.644		C0 C3 01 0A 00 06 59 FD
10:57:20.644		step: 1.o
10:57:20.644		- Read any number of valid responses beginning w/ sequence(0x03) and incrementing by 1 modulo 16
10:57:20.644		- Verify that the response contains objects
10:57:20.644		- Verify that the device responds with only variations: Set(g10v1, g10v2)
10:57:20.644		- Verify that the objects are in start/stop ranges with 1-octet (qualifier 0x00) or 2-octet (qualifier 0x01) indexes
10:57:20.644		- Verify that the IIN field does not contain bits IIN(LocalControl)
10:57:20.644		- Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
10:57:20.644		- Verify that every binary output has the flags it had in the first read
10:57:20.644		- Confirm each response that asks for a confirmation
10:57:20.645	<-P--	05 64 25 44 01 00 00 04 07 3D
10:57:20.645		C3 C3 81 90 00 0A 02 01 00 00 13 00 01 01 01 01 86 27
10:57:20.645		01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 01 BB C3
10:57:20.645	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 37 dest: 1 src: 1024
10:57:20.645	<-T--	fir: 1 fin: 1 seq: 3
10:57:20.645	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
10:57:20.645		g10v2, 2-Byte Start/Stop, start: 0 stop: 19
10:57:20.645		[0] - flags: 0x01
10:57:20.645		[1] - flags: 0x01
10:57:20.645		[2] - flags: 0x01
10:57:20.645		[3] - flags: 0x01
10:57:20.645		[4] - flags: 0x01
10:57:20.645		[5] - flags: 0x01
10:57:20.645		[6] - flags: 0x01
10:57:20.645		[7] - flags: 0x01
10:57:20.645		[8] - flags: 0x01
10:57:20.645		[9] - flags: 0x01
10:57:20.645		[10] - flags: 0x01
10:57:20.645		[11] - flags: 0x01
10:57:20.645		[12] - flags: 0x01
10:57:20.645		[13] - flags: 0x01
10:57:20.645		[14] - flags: 0x01
10:57:20.645		[15] - flags: 0x01
10:57:20.645		[16] - flags: 0x01
10:57:20.645		[17] - flags: 0x01
10:57:20.645		[18] - flags: 0x01
10:57:20.645		[19] - flags: 0x01
10:57:20.647		step: 1.p
10:57:20.647		- Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
10:57:20.647		- g12v1, 1-Byte Count and Index, count: 1
10:57:20.647		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:57:20.647	--A->	Direct Operate(0x05) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04
10:57:20.647		g12v1, 1-Byte Count and Index, count: 1
10:57:20.647		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:57:20.647	--T->	fir: 1 fin: 1 seq: 0
10:57:20.647	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 1024 src: 1
10:57:20.647	--P->	05 64 18 C4 00 04 01 00 5B 61
10:57:20.647		C0 C4 05 0C 01 17 01 00 03 01 64 00 00 00 C8 00 C4 62
10:57:20.647		00 00 00 FF FF
10:57:20.647		step: 1.q
10:57:20.647		- Read a single fragment response w/ sequence(0x04)
10:57:20.647		- Verify the response contains the exact object header:
10:57:20.647		- g12v1, 1-Byte Count and Index, count: 1
10:57:20.647		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:57:20.647		- Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:57:20.647		- Verify that the IIN field does not contain bits IIN(LocalControl)
10:57:20.648	<-P--	05 64 1A 44 01 00 00 04 A6 F0
10:57:20.648		C4 C4 81 90 00 0C 01 17 01 00 03 01 64 00 00 00 CC 14
10:57:20.648		C8 00 00 00 00 78 FB
10:57:20.648	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 26 dest: 1 src: 1024
10:57:20.648	<-T--	fir: 1 fin: 1 seq: 4
10:57:20.648	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x04 IIN(DeviceRestart, NeedTime)
10:57:20.648		g12v1, 1-Byte Count and Index, count: 1
10:57:20.648		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:57:20.648		step: 1.r
10:57:20.648		- Check that binary control point 0 operate
10:57:20.648	[PLG]	Binary output 0 did operate
10:57:20.648		Passed procedure: 8.6.4.2