10:57:24.386		Running procedure: 8.6.5.3
10:57:24.387		This procedure is enabled because the following options:
10:57:24.387		- supports.binaryOutput.commands == true or supports.analogOutput.commands == true
10:57:24.388		step: 1
10:57:24.388		- Tell a manual tester: Watch binary output 0: it should operate once after the broadcast in step 1. You'll be asked what you saw after the steps. Get ready, then press ENTER.
10:57:24.388		- Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00 using link options: { destination == 0xFFFF }
10:57:24.388		- g12v1, 1-Byte Count and Index, count: 1
10:57:24.388		- [0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:57:24.388	--A->	Direct Operate No Ack(0x06) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x00
10:57:24.388		g12v1, 1-Byte Count and Index, count: 1
10:57:24.388		[0] - code: 0x03 (LATCH_ON, NUL) count: 1 onTime: 100 offTime: 200 status: 0 (SUCCESS)
10:57:24.388	--T->	fir: 1 fin: 1 seq: 0
10:57:24.388	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 24 dest: 65535 src: 1
10:57:24.388	--P->	05 64 18 C4 FF FF 01 00 0E E4
10:57:24.388		C0 C0 06 0C 01 17 01 00 03 01 64 00 00 00 C8 00 CD D4
10:57:24.388		00 00 00 FF FF
10:57:24.388		step: 2
10:57:24.388		- Check that binary control point 0 operate
10:57:24.388	[PLG]	Binary output 0 did operate
10:57:24.388		steps: 3 to 4
10:57:24.388		- Verify that no link layer frames are received within 2000 ms
10:57:26.389		frame receive timeout
10:57:26.389		step: 5
10:57:26.389		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:57:26.389		- g60v2, All Objects
10:57:26.389	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02
10:57:26.389		g60v2, All Objects
10:57:26.389	--T->	fir: 1 fin: 1 seq: 0
10:57:26.389	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:57:26.390	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:57:26.390		C0 C2 01 3C 02 06 58 A6
10:57:26.390		steps: 6 to 7
10:57:26.390		- Read any number of valid responses beginning w/ sequence(0x02) and incrementing by 1 modulo 16
10:57:26.390		- Verify that each fragment followed by another, or carrying events, asks for an application layer confirmation.
10:57:26.390		- Verify that the IIN field contains IIN(Broadcast)
10:57:26.390		- Confirm each response that asks for a confirmation
10:57:26.390	<-P--	05 64 0A 44 01 00 00 04 67 88
10:57:26.390		C0 C2 81 91 00 7C 4F
10:57:26.390	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
10:57:26.390	<-T--	fir: 1 fin: 1 seq: 0
10:57:26.390	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x02 IIN(DeviceRestart, NeedTime, Broadcast)
10:57:26.390		step: 8
10:57:26.390		- Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:57:26.390		- g60v2, All Objects
10:57:26.390	--A->	Read(0x01) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03
10:57:26.390		g60v2, All Objects
10:57:26.390	--T->	fir: 1 fin: 1 seq: 0
10:57:26.390	--L->	master: 1 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0xC4 length: 11 dest: 1024 src: 1
10:57:26.390	--P->	05 64 0B C4 00 04 01 00 CA 8A
10:57:26.390		C0 C3 01 3C 02 06 5E 85
10:57:26.390		step: 9
10:57:26.390		- Read a single fragment response w/ sequence(0x03)
10:57:26.390		- Verify that the response is empty
10:57:26.390		- Verify that the IIN field does not contain bits IIN(ParamError, ObjectUnknown, FuncNotSupported)
10:57:26.390		- Verify that the IIN field does not contain bits IIN(Broadcast)
10:57:26.391	<-P--	05 64 0A 44 01 00 00 04 67 88
10:57:26.391		C1 C3 81 90 00 DC 05
10:57:26.391	<-L--	master: 0 pri: 1 fcb: 0 fcv: 0 func: UNCONFIRMED_USER_DATA(0x04) 0x44 length: 10 dest: 1 src: 1024
10:57:26.391	<-T--	fir: 1 fin: 1 seq: 1
10:57:26.391	<-A--	Response(0x81) fir: 1 fin: 1 con: 0 uns: 0 seq: 0x03 IIN(DeviceRestart, NeedTime)
10:57:26.391		Passed procedure: 8.6.5.3